[sane-devel] brigthness with Canon iDE110

[m. allan noah]

You have misspelled brightness.

allan

On Thu, Dec 6, 2012 at 12:50 PM, Felipe de Jesus Garcia Martinez
<felipe.garcia at microformas.com.mx> wrote:
> I try to use my Canon iDE110 with brigthness parameter but scanimage:
> unrecognized option '--brigthness=10' some one know if that is
> possible?
>
> root at GSI-000434:/home/val# scanimage --device-name=genesys
> --brigthness=10 --format=tiff >otra.tiff
> [sanei_debug] Setting debug level of dll to 255.
> [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
> [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
> [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
> [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
> [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
> [dll] sane_init/read_config: reading dll.d/hplip
> [dll] add_backend: adding backend `hpaio'
> [dll] sane_init/read_dlld: done.
> [dll] sane_init/read_config: reading dll.conf
> [dll] add_backend: adding backend `net'
> [dll] add_backend: adding backend `abaton'
> [dll] add_backend: adding backend `agfafocus'
> [dll] add_backend: adding backend `apple'
> [dll] add_backend: adding backend `avision'
> [dll] add_backend: adding backend `artec'
> [dll] add_backend: adding backend `artec_eplus48u'
> [dll] add_backend: adding backend `as6e'
> [dll] add_backend: adding backend `bh'
> [dll] add_backend: adding backend `canon'
> [dll] add_backend: adding backend `canon630u'
> [dll] add_backend: adding backend `canon_dr'
> [dll] add_backend: adding backend `cardscan'
> [dll] add_backend: adding backend `coolscan'
> [dll] add_backend: adding backend `coolscan3'
> [dll] add_backend: adding backend `dell1600n_net'
> [dll] add_backend: adding backend `dmc'
> [dll] add_backend: adding backend `epjitsu'
> [dll] add_backend: adding backend `epson2'
> [dll] add_backend: adding backend `fujitsu'
> [dll] add_backend: adding backend `genesys'
> [dll] add_backend: adding backend `gt68xx'
> [dll] add_backend: adding backend `hp'
> [dll] add_backend: adding backend `hp3900'
> [dll] add_backend: adding backend `hpsj5s'
> [dll] add_backend: adding backend `hp3500'
> [dll] add_backend: adding backend `hp4200'
> [dll] add_backend: adding backend `hp5400'
> [dll] add_backend: adding backend `hp5590'
> [dll] add_backend: adding backend `hpljm1005'
> [dll] add_backend: adding backend `hs2p'
> [dll] add_backend: adding backend `ibm'
> [dll] add_backend: adding backend `kodak'
> [dll] add_backend: adding backend `kvs1025'
> [dll] add_backend: adding backend `kvs20xx'
> [dll] add_backend: adding backend `leo'
> [dll] add_backend: adding backend `lexmark'
> [dll] add_backend: adding backend `ma1509'
> [dll] add_backend: adding backend `magicolor'
> [dll] add_backend: adding backend `matsushita'
> [dll] add_backend: adding backend `microtek'
> [dll] add_backend: adding backend `microtek2'
> [dll] add_backend: adding backend `mustek'
> [dll] add_backend: adding backend `mustek_usb'
> [dll] add_backend: adding backend `mustek_usb2'
> [dll] add_backend: adding backend `nec'
> [dll] add_backend: adding backend `niash'
> [dll] add_backend: adding backend `pie'
> [dll] add_backend: adding backend `pixma'
> [dll] add_backend: adding backend `plustek'
> [dll] add_backend: adding backend `qcam'
> [dll] add_backend: adding backend `ricoh'
> [dll] add_backend: adding backend `rts8891'
> [dll] add_backend: adding backend `s9036'
> [dll] add_backend: adding backend `sceptre'
> [dll] add_backend: adding backend `sharp'
> [dll] add_backend: adding backend `sm3600'
> [dll] add_backend: adding backend `sm3840'
> [dll] add_backend: adding backend `snapscan'
> [dll] add_backend: adding backend `sp15c'
> [dll] add_backend: adding backend `tamarack'
> [dll] add_backend: adding backend `teco1'
> [dll] add_backend: adding backend `teco2'
> [dll] add_backend: adding backend `teco3'
> [dll] add_backend: adding backend `u12'
> [dll] add_backend: adding backend `umax'
> [dll] add_backend: adding backend `umax1220u'
> [dll] add_backend: adding backend `v4l'
> [dll] add_backend: adding backend `xerox_mfp'
> [dll] sane_open: trying to open `genesys'
> [dll] load: searching backend `genesys' in
> `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
> [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
> [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
> [dll] init: initializing backend `genesys'
> [dll] init: backend `genesys' is version 1.0.63
> scanimage: open of device genesys failed: Invalid argument
> [dll] sane_exit: exiting
> [dll] sane_exit: calling backend `genesys's exit function
> [dll] sane_exit: finished
> root at GSI-000434:/home/val# scanimage --device-name=genesys
> --brigthness=10 --format=tiff >otra.tiff
> [sanei_debug] Setting debug level of dll to 255.
> [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
> [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
> [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
> [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
> [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
> [dll] sane_init/read_config: reading dll.d/hplip
> [dll] add_backend: adding backend `hpaio'
> [dll] sane_init/read_dlld: done.
> [dll] sane_init/read_config: reading dll.conf
> [dll] add_backend: adding backend `net'
> [dll] add_backend: adding backend `abaton'
> [dll] add_backend: adding backend `agfafocus'
> [dll] add_backend: adding backend `apple'
> [dll] add_backend: adding backend `avision'
> [dll] add_backend: adding backend `artec'
> [dll] add_backend: adding backend `artec_eplus48u'
> [dll] add_backend: adding backend `as6e'
> [dll] add_backend: adding backend `bh'
> [dll] add_backend: adding backend `canon'
> [dll] add_backend: adding backend `canon630u'
> [dll] add_backend: adding backend `canon_dr'
> [dll] add_backend: adding backend `cardscan'
> [dll] add_backend: adding backend `coolscan'
> [dll] add_backend: adding backend `coolscan3'
> [dll] add_backend: adding backend `dell1600n_net'
> [dll] add_backend: adding backend `dmc'
> [dll] add_backend: adding backend `epjitsu'
> [dll] add_backend: adding backend `epson2'
> [dll] add_backend: adding backend `fujitsu'
> [dll] add_backend: adding backend `genesys'
> [dll] add_backend: adding backend `gt68xx'
> [dll] add_backend: adding backend `hp'
> [dll] add_backend: adding backend `hp3900'
> [dll] add_backend: adding backend `hpsj5s'
> [dll] add_backend: adding backend `hp3500'
> [dll] add_backend: adding backend `hp4200'
> [dll] add_backend: adding backend `hp5400'
> [dll] add_backend: adding backend `hp5590'
> [dll] add_backend: adding backend `hpljm1005'
> [dll] add_backend: adding backend `hs2p'
> [dll] add_backend: adding backend `ibm'
> [dll] add_backend: adding backend `kodak'
> [dll] add_backend: adding backend `kvs1025'
> [dll] add_backend: adding backend `kvs20xx'
> [dll] add_backend: adding backend `leo'
> [dll] add_backend: adding backend `lexmark'
> [dll] add_backend: adding backend `ma1509'
> [dll] add_backend: adding backend `magicolor'
> [dll] add_backend: adding backend `matsushita'
> [dll] add_backend: adding backend `microtek'
> [dll] add_backend: adding backend `microtek2'
> [dll] add_backend: adding backend `mustek'
> [dll] add_backend: adding backend `mustek_usb'
> [dll] add_backend: adding backend `mustek_usb2'
> [dll] add_backend: adding backend `nec'
> [dll] add_backend: adding backend `niash'
> [dll] add_backend: adding backend `pie'
> [dll] add_backend: adding backend `pixma'
> [dll] add_backend: adding backend `plustek'
> [dll] add_backend: adding backend `qcam'
> [dll] add_backend: adding backend `ricoh'
> [dll] add_backend: adding backend `rts8891'
> [dll] add_backend: adding backend `s9036'
> [dll] add_backend: adding backend `sceptre'
> [dll] add_backend: adding backend `sharp'
> [dll] add_backend: adding backend `sm3600'
> [dll] add_backend: adding backend `sm3840'
> [dll] add_backend: adding backend `snapscan'
> [dll] add_backend: adding backend `sp15c'
> [dll] add_backend: adding backend `tamarack'
> [dll] add_backend: adding backend `teco1'
> [dll] add_backend: adding backend `teco2'
> [dll] add_backend: adding backend `teco3'
> [dll] add_backend: adding backend `u12'
> [dll] add_backend: adding backend `umax'
> [dll] add_backend: adding backend `umax1220u'
> [dll] add_backend: adding backend `v4l'
> [dll] add_backend: adding backend `xerox_mfp'
> [dll] sane_open: trying to open `genesys'
> [dll] load: searching backend `genesys' in
> `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
> [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
> [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
> [dll] init: initializing backend `genesys'
> [dll] init: backend `genesys' is version 1.0.63
> [dll] sane_open: open successful
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
> [dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895628,info=(nil))
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
> [dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895558,info=(nil))
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=1)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=2)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=3)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=4)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=5)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=6)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=7)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=8)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=9)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=10)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=11)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=12)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=13)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=14)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=15)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=16)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=17)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=18)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=19)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=20)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=21)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=22)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=23)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=24)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=25)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=26)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=27)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=28)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=29)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=30)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=31)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=32)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=33)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=34)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=35)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=36)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=37)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=38)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=39)
> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=40)
> [dll] sane_control_option(handle=0x898f1b0,option=10,action=0,value=0x80533f0,info=(nil))
> [dll] sane_control_option(handle=0x898f1b0,option=8,action=0,value=0xbf89555c,info=(nil))
> [dll] sane_control_option(handle=0x898f1b0,option=11,action=0,value=0x80533f4,info=(nil))
> [dll] sane_control_option(handle=0x898f1b0,option=9,action=0,value=0xbf89555c,info=(nil))
> scanimage: unrecognized option '--brigthness=10'
> [dll] sane_close(handle=0x898f1b0)
> [dll] sane_exit: exiting
> [dll] sane_exit: calling backend `genesys's exit function
> [dll] sane_exit: finished
>
>
>
> Felipe García Martínez
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org



-- 
"The truth is an offense, but not a sin"