[sane-devel] Canon Pixma MX375 problem
dreamos82 at yahoo.it
Sat Dec 29 17:40:44 UTC 2012
I tried to scan an image at 600 dpi wit xsane, and i didn't found any error. This is the output of xsane:
[pixma] Reader task terminated
But if i try to scan at 1200 dpi i receive the ETIMEDOUT problem. This error happen even if i try to scan with ADF (so adf is not working for me).
----- Messaggio originale -----
Da: Rolf Bensch <rolf at bensch-online.de>
A: Ivan G. <dreamos82 at yahoo.it>
Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org>
Inviato: Sabato 29 Dicembre 2012 15:56
Oggetto: Re: Re: [sane-devel] Canon Pixma MX375 problem
Following the installation description also means to install latest sane
1.0.24 from git.
Your scanner is experimental code in 1.0.23 and you need to create the
environment variable PIXMA_EXPERIMENT.
Next week I will have a look to the timeout problem.
Last question: Does your scanner scan images above 600 dpi without any
error and is adf working?
Am 28.12.2012 23:24, schrieb Ivan G.:
> i just managed to have scanimage working, i succesfully scanned an image following suggestions reported here:
> i simply exported these variables:
> export PIXMA_EXPERIMENT=export SANE_DEBUG_PIXMA
> And now it seems to work (also with xsane).
> The only problem now is that sometimes i receive the following timeout error:
> [pixma] XML message sent to scanner:
> <?xml version=.0" encoding="utf-8" ?><cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/"><ivec:contents><ivec:operation>EndJob</ivec:operation><ivec:param_set servicetype="scan"><ivec:jobID>00000001</ivec:jobID></ivec:param_set></ivec:contents></cmd>
> [pixma] XML response back from scanner:
> <?xml version=.0" encoding="utf-8" ?>
> <cmd xmlns:ivec=ttp://www.canon.com/ns/cmd/2008/07/common/">
> <ivec:param_set servicetype=can">
> [pixma] pixma_read_image() failed ETIMEDOUT
> [pixma] Reader task terminated: ETIMEDOUT
> [pixma] read_image():reader task closed the pipe:0 bytes received, 1678578 bytes expected
> [pixma] pixma_close(): Canon PIXMA MX370 Series
> it seems to verify when the scanner is in sleep mode, that it took 3 or 4 seconds to wake-up.
> There is a way to manipulate that timeout?
> I looked on the git version of the README. But still i cannot find anything related to my problem, but it seems that i solved it.
> That file doesn't contain any helpful information on how to solve my problem.
> ----- Messaggio originale -----
> Da: Rolf Bensch <rolf at bensch-online.de>
> A: Ivan G. <dreamos82 at yahoo.it>
> Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org>
> Inviato: Venerdì 28 Dicembre 2012 20:49
> Oggetto: Re: Re: [sane-devel] Canon Pixma MX375 problem
> Hi Ivan,
> You can find an old version on the website:
> or the latest one in git; fetch a r/o clone with: '$ git clone
> Am 28.12.2012 19:22, schrieb Ivan G.:
>> Hi rolf,
>> i lookedd at README.linux, but i cannot find where it can help me.
>> 1. i installed it using gentoo package manager
>> 2. the scanner is recognized by sane, but i get the error:
>> scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
>> 3. The usb flag is set for sane package.
>> Or maybe i missed the point with the solution in README.linux?
>> Any other idea?
>> ----- Messaggio originale -----
>> Da: Rolf Bensch <webmaster at bensch-online.de>
>> A: Ivan Ivello <dreamos82 at yahoo.it>
>> Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org>
>> Inviato: Venerdì 28 Dicembre 2012 14:40
>> Oggetto: Re: [sane-devel] Canon Pixma MX375 problem
>> Hi Ivan,
>> Please follow the installation description in README.linux.
>> Am 27.12.2012 23:26, schrieb Ivan Ivello:
>>> Hi all,
>>> i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done by Daniel on a previous post (here: http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html)
>>> I installed sane-backends 1.0.23 with (compiled with sane_backends_pixma use flag enabled) and activated debug mode.
>>> Then sane-find-scanner seems to find the scanner:
>>> # sane-find-scanner will now attempt to detect your scanner. If the
>>> # result is different from what you expected, first make sure your
>>> # scanner is powered up and properly connected to your computer.
>>> # No SCSI scanners found. If you expected something different, make sure that
>>> # you have loaded a kernel SCSI driver for your SCSI adapter.
>>> found USB scanner (vendora9 [Canon], product=1759 [MX370 series]) at libusb:002:005
>>> # Your USB scanner was (probably) detected. It may or may not be supported by
>>> # SANE. Try scanimage -L and read the backend's manpage.
>>> # Not checking for parallel port scanners.
>>> # Most Scanners connected to the parallel port or other proprietary ports
>>> But any other command that try to access the scanner receive the following error:
>>> root ~#scanimage > test.pnm
>>> scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
>>> Any idea?
More information about the sane-devel