[sane-devel] HP 2200c problems, wrong colors and stripes.
mailinglists at gusnan.se
Wed Jun 13 11:18:54 UTC 2012
On Sat, 09 Jun 2012 15:29:30 +0200
Fabiano <fabtarr at gmail.com> wrote:
> I have a problem since about 2 years just after a Linux update (first
> it was working right in Linux). The scanner is working fine in
> windows XP, scanned images are perfect; In Linux, the first scan is
> (sometimes) right than the other scans are corrupted, the images have
> vertical stripes (both in colour and grey scans). The colour scans
> results in wrong colors and sometimes the scan looks more light in
> the left side and darker in the right side I'm currently using
> Opensuse 12.1 (but the problem was still present in 11.2/3), xsane
> version 0.998, sane backends 1.0.22, ibusb 0.1.13.
You are not alone in getting these results with a 2200C -
scanimage -L reports:
device `plustek:libusb:002:003' is a Hewlett-Packard Scanjet 2200c
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0605 [HP
ScanJet 2200C], chip=LM9832/3) at libusb:002:003
and I have similar results - Sometimes the scanned image is tinted on
the right and left edges (I believe it was to pink and yellow, if I
remember correctly) - and sometimes I am affected by stripes too.
However - every now and then, I get a very nice scan.
I just email to let you know you are not alone with the results you
get, but unfortunately I don't have a solution...
gusnan at gusnan.se
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 836 bytes
Desc: not available
More information about the sane-devel