[sane-devel] Canon LiDe 210 Genesys backend gone wrong

stef stef.dev at free.fr
Thu Jun 28 19:25:58 UTC 2012


Le 28/06/2012 13:59, Jay Christnach a écrit :
>> Hello,
>>
>>     thanks for all these data. I have uploaded at 
>> http://dl.free.fr/gEzUYJkHX a small 'gl124' unit test program. It 
>> does an uncorrected color scan at 150 dpi. It is a fully static 32 
>> binary using libusb-1.0.9 . Put it in a directory, copy your 
>> genesys.conf file in the same directory then run it. You should see 
>> the lamp switch on. I'm curious to know how it behaves in the "buggy" 
>> hardware combination.
>>
>> Regards,
>>      Stef
     OK,

     now here's the same test program compiled against legacy libusb 0.1 
(and not through the compat libusb-1.0). If it still doesn't light on 
the lamp, I think we can rule out a libusb problem:

http://dl.free.fr/rm.pl?h=reyVJTLYp&i=48660014&s=XdEvMMX5NTGQlxGZp3zmhq6vZSkoY4FE


Regards,
     Stef




More information about the sane-devel mailing list