[sane-devel] Canon DR-3010C scanner

[Stef]

On 27/11/2012 07:02, Milko Simeonov wrote:
> Hi Stef,
>
> At least as per its manual, this device (the flatbed unit) cannot 
> operate on its own. You need to have a scanner (for example a 
> DR-3010C) and this flatbed unit is an addition to the scanner. I've 
> tried in Windows - if you connect only the flatbed unit, you cannot 
> scan. You need to have both devices connected. Of course, this could 
> simply be a restriction set on purpose in the Windows driver.
>
> I can give you full remote access to a Windows PC and to a Linux PC 
> with both scanning devices connected, and I can ensure there will be a 
> person you can talk to at all times. Would this be OK?
>
> Cheers,
> Milko
>
     Hello,

     this kind of setting is far from ideal. But we could give it a try. 
Before going further, I'd like to study the UsbSnoop log of a 75, 150 
and 300 dpi full scan area. So I can investigate and plan what should be 
done.

Regards,
     Stef
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121128/85fb62a0/attachment.html>