[sane-devel] scanbd with old udev version

[Wilhelm]

Am 22.08.2013 08:58, schrieb Sander Devrieze:
> 2013/8/22 Wilhelm <wilhelm.meier at fh-kl.de <mailto:wilhelm.meier at fh-kl.de>>
>
>     Am 21.08.2013 23:27, schrieb Sander Devrieze:
>
>         2013/8/21 Wilhelm <wilhelm.meier at fh-kl.de
>         <mailto:wilhelm.meier at fh-kl.de> <mailto:wilhelm.meier at fh-kl.de
>         <mailto:wilhelm.meier at fh-kl.de>__>>
>
>              Am 21.08.2013 16:04, schrieb Sander Devrieze:
>
>                  2013/8/21 Wilhelm <wilhelm.meier at fh-kl.de
>         <mailto:wilhelm.meier at fh-kl.de>
>                  <mailto:wilhelm.meier at fh-kl.de
>         <mailto:wilhelm.meier at fh-kl.de>__>
>         <mailto:wilhelm.meier at fh-kl.de <mailto:wilhelm.meier at fh-kl.de>
>
>                  <mailto:wilhelm.meier at fh-kl.de
>         <mailto:wilhelm.meier at fh-kl.de>__>>
>
>
>         <snip>
>
>              Mmh, looks good.
>
>              So, if scanimage finds the scanner (started with the
>         uid/gid as in
>              scanbd.conf), scanbd should find it too, if started as root
>         and the
>              env-var SANE_CONFIG_DIR set.
>
>
>         Scanimage does not find the scanner right now. It did only find the
>         scanner when not using the net backend os sane.
>
>
>     That's ok. For a desktop machine using scanbd and local scanning
>     apps (like scanimage), scanbd / scanbm must be running. Please read
>     0.1) solution from the README.txt: scanbm acts as a proxy for saned.
>
>
>         In that case, the
>         genesys backend was immediately chosen. What else can I try?
>
>
>     The below log shows, that scanbd recognizes the scanner and his
>     options. So now you have to figure out which buttons correlate to
>     which option value changes: just press a button and watch the log.
>     Then you can tweak the scripts for the button actions.
>
>
> This is the current status:
> 1) saned not running + scanbd not running + scanimage -L --> scanner found

this is not intended to work: scanimage should use the net backend and 
if saned isn't running it shouldn't work

> 2) saned not running + scanbd running + manually running scanbm --> the
> logs show scanbd is interrupted for a short moment

ok

> 3) saned not running + scanbd running + scanimage -L --> scanner *not* found
>
> Why is case #3 not working?

Presumably, scanimage is using the wrong dll.conf.

-- 
Wilhelm
w.meier at unix.net