[sane-devel] scanbd Canon MG6250

[Matthias Thon]

Am Sonntag, den 03.02.2013, 13:09 +0100 schrieb Matthias Thon:
> Hello Rolf,
> 
> ihave checked your informations. The MG6250 doesn't have a target
> option. Only the two buttons.I have tryed many cases on the MG but the
> value of the buttons stay's at value "0". Normaly i have conncted the
> printer over wlan or ethernet. If i try to push "scan" and then "color"
> i get an error on the printer, because he doesn't recocnice the scanning
> PC. He shows me only "local USB".
> 
> I have connected the printer with a USB_cable. Then i can push the
> "color" or "grey" button and the printe waits for the scanning  process.
> But scanimage -A shows no changes. The only change is in the resolution
> option. This option adds 4800 dpi.
> 
> scanimage --button-controlled doesn't start the scan after pressing
> "color" or "grey" button.
> 
> Scanning from outside (xsane) works well.
> 
> regards Matthias
> 
> Am Samstag, den 02.02.2013, 18:09 +0100 schrieb Rolf Bensch:
> > Hi Matthias,
> > 
> > To discover the communication between Sane and scanbd try 'scanimage
> > -A'. Press a button and start 'scanimage -A' again. Repeat this until
> > you'll have the codes for all buttons.
> > 
> > For my CS9000F I get data for --button-1, --button-2 *and* --target.
> > 
> > Please have a look to my posting here:
> > http://lists.alioth.debian.org/pipermail/sane-devel/2013-January/030828.html.
> > 
> > If you don't get any codes for your buttons please contact me again.
> > Then we have to patch the backend for your scanner.
> > 
> > Cheers,
> > Rolf
> > 
> > 
> > 
> > Am 01.02.2013 16:59, schrieb Matthias Thon:
> > > Hello,
> > > i've tried to use scanbd with my MG6200 Series device. He finds
> > > "button-1" and "button-2" option. But the value is still "0".
> > > 
> > > I have try "Scan" -> "Black&White" or "Scan" -> "Color".
> > > 
> > > Is there a way to see more detailed the communication between scanbd and
> > > the device? (more then with debug level 7)
> > > 
> > > regards
> > > 
> > > 
> > > 
>