[sane-devel] scanbd Canon MG6250

[Matthias Thon]

Hello Rolf,

i have tested with USB connection. But the result is equal. Here the output
of scanimage:

regards Matthias


root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends#
scanimage -V
scanimage (sane-backends) 1.0.24git; backend version 1.0.24
root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends#
scanimage -A
[sanei_debug] Setting debug level of pixma to 7.
[pixma] pixma is compiled without pthread support.
[pixma] pixma version 0.17.0
[pixma] pixma_collect_devices() found Canon PIXMA MG6200 at libusb:002:005
[pixma] sanei_bjnp_find_devices:
[pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
[pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
[pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
[pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner not yet in our list, added it: D0E69C000000.fritz.box:8612
[pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
series;SOJ:BJNP2,BJNPe; - lenght = 101
[pixma] Scanner model = MG6200 series
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
bjnp://D0E69C000000.fritz.box:8612
[pixma] pixma_find_scanners() found 2 devices
[pixma] pixma_collect_devices() found Canon PIXMA MG6200 at libusb:002:005
[pixma] sanei_bjnp_find_devices:
[pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
[pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
[pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
[pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner not yet in our list, added it: D0E69C000000.fritz.box:8612
[pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
series;SOJ:BJNP2,BJNPe; - lenght = 101
[pixma] Scanner model = MG6200 series
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
good!
[pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
bjnp://D0E69C000000.fritz.box:8612
[pixma] pixma_open(): Canon PIXMA MG6200
[pixma] sanei_bjnp_open(bjnp://D0E69C000000.fritz.box:8612, -1219067408):
[pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
hostname
[pixma] sanei_bjnp_activate (0)
[pixma] sanei_bjnp_deactivate (0)

All options specific to device `pixma:MG6200_D0E69C000000':
  Scan mode:
    --resolution auto||75|150|300|600|1200|2400|4800dpi [75]
        Sets the resolution of the scanned image.
    --mode auto|Color|Gray|Lineart [Color]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --source Flatbed [Flatbed]
        Selects the scan source (such as a document-feeder). Set source
before
        mode and resolution. Resets mode and resolution to auto values.
    --button-controlled[=(yes|no)] [no]
        When enabled, scan process will not start immediately. To proceed,
        press "SCAN" button (for MP150) or "COLOR" button (for other
models).
        To cancel, press "GRAY" button.
  Gamma:
    --custom-gamma[=(auto|yes|no)] [yes]
        Determines whether a builtin or a custom gamma-table should be used.
    --gamma-table auto|0..255,...
        Gamma-correction table.  In color mode this option equally affects
the
        red, green, and blue channels simultaneously (i.e., it is an
intensity
        gamma table).
    --gamma auto|0.299988..5 [2.2]
        Changes intensity of midtones
  Geometry:
    -l auto|0..216.069mm [0]
        Top-left x position of scan area.
    -t auto|0..297.011mm [0]
        Top-left y position of scan area.
    -x auto|0..216.069mm [216.069]
        Width of scan-area.
    -y auto|0..297.011mm [297.011]
        Height of scan-area.
  Buttons:
    --button-update
        Update button state
[pixma] bjnp_set_timeout to 300
[pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
    --button-1 <int> [0] [read-only]
        Button 1
    --button-2 <int> [0] [read-only]
        Button 2
    --original <int> [0] [read-only]
        Type of original to scan
    --target <int> [0] [read-only]
        Target operation type
  Extras:
    --threshold auto|0..100% (in steps of 1) [inactive]
        Select minimum-brightness to get a white point
    --threshold-curve auto|0..127 (in steps of 1) [inactive]
        Dynamic threshold curve, from light to dark, normally 50-65

[pixma] pixma_close(): Canon PIXMA MG6200
[pixma] sanei_bjnp_close(0):
[pixma] sanei_bjnp_deactivate (0)
root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130205/d93baeb4/attachment.html>