[sane-devel] scanbd Canon MG6250

Tue Feb 5 21:38:00 UTC 2013

Hi Matthias,

Are you sure that you are using the latest version from git? You should
get this line: "[pixma] pixma version 0.17.1"

But, it seems that you get data from the scanner now.

Please enable these debug levels: 'export SANE_DEBUG_PIXMA=21' and
'export SANE_DEBUG_SANEI_USB=255'.

You only need to provide the lines between "Buttons:" and "Extras:".

And please let us fix the scanner connected to the USB bus first before
we test it via the LAN interface (bjnp).

Cheers,
Rolf

Am 05.02.2013 17:57, schrieb Matthias Thon:
> Hello Rolf,
> 
> i have tested with USB connection. But the result is equal. Here the
> output of scanimage:
> 
> regards Matthias
> 
> 
> root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends# scanimage
> -V
> scanimage (sane-backends) 1.0.24git; backend version 1.0.24
> root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends# scanimage
> -A
> [sanei_debug] Setting debug level of pixma to 7.
> [pixma] pixma is compiled without pthread support.
> [pixma] pixma version 0.17.0
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at libusb:002:005
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
> [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it: D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_find_scanners() found 2 devices
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at libusb:002:005
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
> [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it: D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_open(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_open(bjnp://D0E69C000000.fritz.box:8612, -1219067408):
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] sanei_bjnp_activate (0)
> [pixma] sanei_bjnp_deactivate (0)
> 
> All options specific to device `pixma:MG6200_D0E69C000000':
>   Scan mode:
>     --resolution auto||75|150|300|600|1200|2400|4800dpi [75]
>         Sets the resolution of the scanned image.
>     --mode auto|Color|Gray|Lineart [Color]
>         Selects the scan mode (e.g., lineart, monochrome, or color).
>     --source Flatbed [Flatbed]
>         Selects the scan source (such as a document-feeder). Set source
> before
>         mode and resolution. Resets mode and resolution to auto values.
>     --button-controlled[=(yes|no)] [no]
>         When enabled, scan process will not start immediately. To proceed,
>         press "SCAN" button (for MP150) or "COLOR" button (for other
> models).
>         To cancel, press "GRAY" button.
>   Gamma:
>     --custom-gamma[=(auto|yes|no)] [yes]
>         Determines whether a builtin or a custom gamma-table should be used.
>     --gamma-table auto|0..255,...
>         Gamma-correction table.  In color mode this option equally
> affects the
>         red, green, and blue channels simultaneously (i.e., it is an
> intensity
>         gamma table).
>     --gamma auto|0.299988..5 [2.2]
>         Changes intensity of midtones
>   Geometry:
>     -l auto|0..216.069mm [0]
>         Top-left x position of scan area.
>     -t auto|0..297.011mm [0]
>         Top-left y position of scan area.
>     -x auto|0..216.069mm [216.069]
>         Width of scan-area.
>     -y auto|0..297.011mm [297.011]
>         Height of scan-area.
>   Buttons:
>     --button-update
>         Update button state
> [pixma] bjnp_set_timeout to 300
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
>     --button-1 <int> [0] [read-only]
>         Button 1
>     --button-2 <int> [0] [read-only]
>         Button 2
>     --original <int> [0] [read-only]
>         Type of original to scan
>     --target <int> [0] [read-only]
>         Target operation type
>   Extras:
>     --threshold auto|0..100% (in steps of 1) [inactive]
>         Select minimum-brightness to get a white point
>     --threshold-curve auto|0..127 (in steps of 1) [inactive]
>         Dynamic threshold curve, from light to dark, normally 50-65
> 
> [pixma] pixma_close(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_close(0):
> [pixma] sanei_bjnp_deactivate (0)
> root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends#
> 