[sane-devel] Help with DR-G1130

[Valeria Genesis Vargas Ruiz]

Hello,

I have problems with DR-G1130, XSANE not recognized  and run this command
and I just scanned a sheet.

root at ubuntu:/home/administrador/Documents/Pruebas-DR-G1130# scanimage
--batch --format=tiff  -l 0 -t 0 -x 210.0 -y 297.0  --resolution "150"
--mode "Gray"scanimage: rounded value of br-x from 210 to 210.01
scanimage: rounded value of br-y from 297 to 279.364
Scanning -1 pages, incrementing by 1, numbering from 1
Scanning page 1
Scanned page 1. (scanner status = 5)
Scanning page 2
scanimage: sane_start: Document feeder out of documents

Can you help me ??

Thanks


2014-07-07 20:25 GMT-05:00 m. allan noah <kitno455 at gmail.com>:

> Nevermind. I have downloaded drivers from canon's site, and extracted the
> information I needed. I have attached a patch. Instructions:
>
> 1. download latest sane-backends snapshot from
> http://www.sane-project.org/snapshots/
> 2. tar xzf sane-backends-git20140708.tar.gz
> 3. cd sane-backends-git20140708
> 4. cat cdr-47a.diff | patch -p1
> 5. ./configure [your various configure options here]
> 6. make
> 7. remove the existing canon_dr.conf file, probably in /etc/sane.d
> 8. sudo make install
>
> Then, as the root user, you should be able to see the DR-G1130 when you
> run scanimage -L, and you should also be able to scan.
>
> To get the non-root user to scan, we will have to modify the device
> permissions, using udev or hal. I am unsure what ancient Ubuntu used.
>
> allan
>
>
>
> On Mon, Jul 7, 2014 at 8:01 PM, m. allan noah <kitno455 at gmail.com> wrote:
>
>> Is the scanner plugged in an turned on? You might have to try it as root
>> user.
>>
>> allan
>>
>>
>> On Mon, Jul 7, 2014 at 7:56 PM, Valeria Genesis Vargas Ruiz <
>> vvargas at microformas.com.mx> wrote:
>>
>>> Hello,
>>>
>>> Here are the result
>>>
>>> Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
>>> Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
>>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>
>>>
>>> Thanks
>>>
>>>
>>> 2014-07-07 18:18 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>>
>>> I assume this scanner is similar to the G1100, so tell me what the USB
>>>> ID's are (the command lsusb will show you), and I will send you a patch
>>>> which attempts to enable this scanner.
>>>>
>>>> allan
>>>>
>>>>
>>>> On Mon, Jul 7, 2014 at 4:13 PM, Valeria Genesis Vargas Ruiz <
>>>> vvargas at microformas.com.mx> wrote:
>>>>
>>>>> Hello
>>>>>
>>>>> Who could support me with this machine to work in Ubuntu 10.04 ??
>>>>>
>>>>> Thanks
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> --
>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>              to sane-devel-request at lists.alioth.debian.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> "The truth is an offense, but not a sin"
>>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>
>>
>> --
>> "The truth is an offense, but not a sin"
>>
>
>
>
> --
> "The truth is an offense, but not a sin"
>



--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20140708/78079586/attachment.html>