[sane-devel] Help with DR-G1130

[m. allan noah]

Are you running xsane as the root user?

allan


On Tue, Jul 8, 2014 at 11:59 AM, Valeria Genesis Vargas Ruiz <
vvargas at microformas.com.mx> wrote:

> Hello,
>
> I have problems with DR-G1130, XSANE not recognized  and run this command
> and I just scanned a sheet.
>
> root at ubuntu:/home/administrador/Documents/Pruebas-DR-G1130# scanimage
> --batch --format=tiff  -l 0 -t 0 -x 210.0 -y 297.0  --resolution "150"
> --mode "Gray"scanimage: rounded value of br-x from 210 to 210.01
> scanimage: rounded value of br-y from 297 to 279.364
> Scanning -1 pages, incrementing by 1, numbering from 1
> Scanning page 1
> Scanned page 1. (scanner status = 5)
> Scanning page 2
> scanimage: sane_start: Document feeder out of documents
>
> Can you help me ??
>
> Thanks
>
>
> 2014-07-07 20:25 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>
> Nevermind. I have downloaded drivers from canon's site, and extracted the
>> information I needed. I have attached a patch. Instructions:
>>
>> 1. download latest sane-backends snapshot from
>> http://www.sane-project.org/snapshots/
>> 2. tar xzf sane-backends-git20140708.tar.gz
>> 3. cd sane-backends-git20140708
>> 4. cat cdr-47a.diff | patch -p1
>> 5. ./configure [your various configure options here]
>> 6. make
>>  7. remove the existing canon_dr.conf file, probably in /etc/sane.d
>> 8. sudo make install
>>
>> Then, as the root user, you should be able to see the DR-G1130 when you
>> run scanimage -L, and you should also be able to scan.
>>
>> To get the non-root user to scan, we will have to modify the device
>> permissions, using udev or hal. I am unsure what ancient Ubuntu used.
>>
>> allan
>>
>>
>>
>> On Mon, Jul 7, 2014 at 8:01 PM, m. allan noah <kitno455 at gmail.com> wrote:
>>
>>> Is the scanner plugged in an turned on? You might have to try it as root
>>> user.
>>>
>>> allan
>>>
>>>
>>> On Mon, Jul 7, 2014 at 7:56 PM, Valeria Genesis Vargas Ruiz <
>>> vvargas at microformas.com.mx> wrote:
>>>
>>>> Hello,
>>>>
>>>> Here are the result
>>>>
>>>> Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
>>>> Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
>>>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>
>>>>
>>>> Thanks
>>>>
>>>>
>>>> 2014-07-07 18:18 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>>>
>>>> I assume this scanner is similar to the G1100, so tell me what the USB
>>>>> ID's are (the command lsusb will show you), and I will send you a patch
>>>>> which attempts to enable this scanner.
>>>>>
>>>>> allan
>>>>>
>>>>>
>>>>> On Mon, Jul 7, 2014 at 4:13 PM, Valeria Genesis Vargas Ruiz <
>>>>> vvargas at microformas.com.mx> wrote:
>>>>>
>>>>>> Hello
>>>>>>
>>>>>> Who could support me with this machine to work in Ubuntu 10.04 ??
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>> --
>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>              to sane-devel-request at lists.alioth.debian.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> "The truth is an offense, but not a sin"
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>
>>>
>>> --
>>> "The truth is an offense, but not a sin"
>>>
>>
>>
>>
>> --
>> "The truth is an offense, but not a sin"
>>
>
>
>
> --
>
>


-- 
"The truth is an offense, but not a sin"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20140708/7eb80e0f/attachment-0001.html>