[sane-devel] Help with DR-G1130

[m. allan noah]

"does not scan well" and "takes too long"- please be more specific- give
the commands that you use, and describe the problem in detail.

allan


On Tue, Jul 8, 2014 at 12:29 PM, Valeria Genesis Vargas Ruiz <
vvargas at microformas.com.mx> wrote:

> Hello,
>
> I can already open XSANE, but I have problems with the scanner does not
> scan well for me with XSANE  and with the terminal  take long to scan 140
> sheets.
>
> Can you help me ?
>
> Thanks
>
>
> 2014-07-08 11:03 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>
> Are you running xsane as the root user?
>>
>> allan
>>
>>
>> On Tue, Jul 8, 2014 at 11:59 AM, Valeria Genesis Vargas Ruiz <
>> vvargas at microformas.com.mx> wrote:
>>
>>> Hello,
>>>
>>> I have problems with DR-G1130, XSANE not recognized  and run this
>>> command and I just scanned a sheet.
>>>
>>> root at ubuntu:/home/administrador/Documents/Pruebas-DR-G1130# scanimage
>>> --batch --format=tiff  -l 0 -t 0 -x 210.0 -y 297.0  --resolution "150"
>>> --mode "Gray"scanimage: rounded value of br-x from 210 to 210.01
>>> scanimage: rounded value of br-y from 297 to 279.364
>>> Scanning -1 pages, incrementing by 1, numbering from 1
>>> Scanning page 1
>>> Scanned page 1. (scanner status = 5)
>>> Scanning page 2
>>> scanimage: sane_start: Document feeder out of documents
>>>
>>> Can you help me ??
>>>
>>> Thanks
>>>
>>>
>>> 2014-07-07 20:25 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>>
>>> Nevermind. I have downloaded drivers from canon's site, and extracted
>>>> the information I needed. I have attached a patch. Instructions:
>>>>
>>>> 1. download latest sane-backends snapshot from
>>>> http://www.sane-project.org/snapshots/
>>>> 2. tar xzf sane-backends-git20140708.tar.gz
>>>> 3. cd sane-backends-git20140708
>>>> 4. cat cdr-47a.diff | patch -p1
>>>> 5. ./configure [your various configure options here]
>>>> 6. make
>>>>  7. remove the existing canon_dr.conf file, probably in /etc/sane.d
>>>> 8. sudo make install
>>>>
>>>> Then, as the root user, you should be able to see the DR-G1130 when you
>>>> run scanimage -L, and you should also be able to scan.
>>>>
>>>> To get the non-root user to scan, we will have to modify the device
>>>> permissions, using udev or hal. I am unsure what ancient Ubuntu used.
>>>>
>>>> allan
>>>>
>>>>
>>>>
>>>> On Mon, Jul 7, 2014 at 8:01 PM, m. allan noah <kitno455 at gmail.com>
>>>> wrote:
>>>>
>>>>> Is the scanner plugged in an turned on? You might have to try it as
>>>>> root user.
>>>>>
>>>>> allan
>>>>>
>>>>>
>>>>> On Mon, Jul 7, 2014 at 7:56 PM, Valeria Genesis Vargas Ruiz <
>>>>> vvargas at microformas.com.mx> wrote:
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> Here are the result
>>>>>>
>>>>>> Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
>>>>>> Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
>>>>>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> 2014-07-07 18:18 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>>>>>
>>>>>> I assume this scanner is similar to the G1100, so tell me what the
>>>>>>> USB ID's are (the command lsusb will show you), and I will send you a patch
>>>>>>> which attempts to enable this scanner.
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Jul 7, 2014 at 4:13 PM, Valeria Genesis Vargas Ruiz <
>>>>>>> vvargas at microformas.com.mx> wrote:
>>>>>>>
>>>>>>>> Hello
>>>>>>>>
>>>>>>>> Who could support me with this machine to work in Ubuntu 10.04 ??
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>              to sane-devel-request at lists.alioth.debian.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> "The truth is an offense, but not a sin"
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> "The truth is an offense, but not a sin"
>>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>
>>
>> --
>> "The truth is an offense, but not a sin"
>>
>
>
>
> --
>
>


-- 
"The truth is an offense, but not a sin"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20140708/db571cde/attachment-0001.html>