[sane-devel] Help with DR-G1130

Tue Jul 8 16:29:59 UTC 2014

Hello,

I can already open XSANE, but I have problems with the scanner does not
scan well for me with XSANE  and with the terminal  take long to scan 140
sheets.

Can you help me ?

Thanks

2014-07-08 11:03 GMT-05:00 m. allan noah <kitno455 at gmail.com>:

> Are you running xsane as the root user?
>
> allan
>
>
> On Tue, Jul 8, 2014 at 11:59 AM, Valeria Genesis Vargas Ruiz <
> vvargas at microformas.com.mx> wrote:
>
>> Hello,
>>
>> I have problems with DR-G1130, XSANE not recognized  and run this command
>> and I just scanned a sheet.
>>
>> root at ubuntu:/home/administrador/Documents/Pruebas-DR-G1130# scanimage
>> --batch --format=tiff  -l 0 -t 0 -x 210.0 -y 297.0  --resolution "150"
>> --mode "Gray"scanimage: rounded value of br-x from 210 to 210.01
>> scanimage: rounded value of br-y from 297 to 279.364
>> Scanning -1 pages, incrementing by 1, numbering from 1
>> Scanning page 1
>> Scanned page 1. (scanner status = 5)
>> Scanning page 2
>> scanimage: sane_start: Document feeder out of documents
>>
>> Can you help me ??
>>
>> Thanks
>>
>>
>> 2014-07-07 20:25 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>
>> Nevermind. I have downloaded drivers from canon's site, and extracted the
>>> information I needed. I have attached a patch. Instructions:
>>>
>>> 1. download latest sane-backends snapshot from
>>> http://www.sane-project.org/snapshots/
>>> 2. tar xzf sane-backends-git20140708.tar.gz
>>> 3. cd sane-backends-git20140708
>>> 4. cat cdr-47a.diff | patch -p1
>>> 5. ./configure [your various configure options here]
>>> 6. make
>>>  7. remove the existing canon_dr.conf file, probably in /etc/sane.d
>>> 8. sudo make install
>>>
>>> Then, as the root user, you should be able to see the DR-G1130 when you
>>> run scanimage -L, and you should also be able to scan.
>>>
>>> To get the non-root user to scan, we will have to modify the device
>>> permissions, using udev or hal. I am unsure what ancient Ubuntu used.
>>>
>>> allan
>>>
>>>
>>>
>>> On Mon, Jul 7, 2014 at 8:01 PM, m. allan noah <kitno455 at gmail.com>
>>> wrote:
>>>
>>>> Is the scanner plugged in an turned on? You might have to try it as
>>>> root user.
>>>>
>>>> allan
>>>>
>>>>
>>>> On Mon, Jul 7, 2014 at 7:56 PM, Valeria Genesis Vargas Ruiz <
>>>> vvargas at microformas.com.mx> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> Here are the result
>>>>>
>>>>> Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
>>>>> Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
>>>>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>>
>>>>> 2014-07-07 18:18 GMT-05:00 m. allan noah <kitno455 at gmail.com>:
>>>>>
>>>>> I assume this scanner is similar to the G1100, so tell me what the USB
>>>>>> ID's are (the command lsusb will show you), and I will send you a patch
>>>>>> which attempts to enable this scanner.
>>>>>>
>>>>>> allan
>>>>>>
>>>>>>
>>>>>> On Mon, Jul 7, 2014 at 4:13 PM, Valeria Genesis Vargas Ruiz <
>>>>>> vvargas at microformas.com.mx> wrote:
>>>>>>
>>>>>>> Hello
>>>>>>>
>>>>>>> Who could support me with this machine to work in Ubuntu 10.04 ??
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>              to sane-devel-request at lists.alioth.debian.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> "The truth is an offense, but not a sin"
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> "The truth is an offense, but not a sin"
>>>>
>>>
>>>
>>>
>>> --
>>> "The truth is an offense, but not a sin"
>>>
>>
>>
>>
>> --
>>
>>
>
>
> --
> "The truth is an offense, but not a sin"
>

--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20140708/ede057a4/attachment.html>