[sane-devel] Brother DCP-J752DW : xsane stops

Guillaume Rizand guillaume.rizand at free.fr
Thu Oct 16 06:19:22 UTC 2014


Hello

- Indeed I installed the Brother drivers, except brscan-skey, I will try 
this one today.
- I don't have the Gimp scan module (?).
- Scanimage is OK :
[CODE]
scanimage -L
device `brother4:net1;dev0' is a Brother SCANNER DCP-J752DW
device `brother4:bus1;dev3' is a Brother DCP-J752DW USB scanner
[/CODE]
- dll.conf is OK
[CODE]
cat /etc/sane.d/dll.conf | grep br
brother4
[/CODE]
- 80-libsane.rules contains :
# Brother DCP-J752DW / added by gui
ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="02e4", MODE="0660", 
GROUP="lp", ENV{libsane_matched}="yes"

So I will try brscan-skey.
Thanks,

Guillaume


Le 15/10/2014 21:40, upscope a écrit :
> On Wednesday, October 15, 2014 09:33:26 AM Guillaume Rizand wrote:
>> Hi
>>
>> I need your help to get my new multifunction printer to work.
>> I read and tried quite a lot of things but still I can only print.
>> When I start Xsane, I can select my usb scanner (wifi is the same
>> problem), then I click "Get preview", I can hear the scanner moving
>> for 1-2 sec and then the Xsane window just closes by itself (without
>> any message if I start it from bash).
>> 2 strange things : I get a partial scan in /tmp of just 128 Ko, I get
>> this message in /var/log/syslog :
>> Oct 15 09:05:18 guiport kernel: [   78.888921] usb 1-1.2: usbfs:
>> interface 2 claimed by usb-storage while 'xsane' sets config #1
>> Oct 15 09:05:18 guiport kernel: [   78.888925] usb 1-1.2: usbfs:
>> process 2049 (xsane) did not claim interface 1 before use
>>
>> Here is my config :
>> - Slackware 64 14.1
>> - kernel 3.14.5
>> - Sane 1.0.24 + Sane-compat-32
>> - XSane 0.998 + XSane-compat-32
>> - BrScan4 0.4.2 (rpm modified into txz for slack)
>> I modified a few files here and there (copy libs from lib64 to lib,
>> added my scanner to /lib/udev/rules.d/80-libsane.rules...).
>>
>> Thanks for your help
>>
>> Guillaume
> Appears you are using the Brothers drivers? I have a Brothers printer (
> MFC J6710DW). It works with Gimp scan, and with the brscan-skey mode.
> But Xsane will not start it. This used to work before the latest xsane
> updates from openSUSE 13.1.
>
> Does scanimage reconize it? Did you
>
> [Code]
>
> scanimage -L
> device `brother4:bus3;dev5' is a Brother MFC-J6710DW USB scanner
>
> [/Code]
>
> also make sure there is an entry at the end of sane.dll.
> [Code]
>   /etc/sane.d/dll.conf
>
> Mine is:
> #xerox_mfp
>
> brother4 (name of printer)
>
> [/Code]
>
> Also when I install mine the first time I found the Product ID missing
> for the printer in /etc/udev/rules.d/55-libsane.rules.
>
> I think this is the same as your 80-libsane.rules. My /lib/udev/rules.d
> does not have the libsane rule in it. This is probably one of the
> differences between openSUSE and Slackware. I am using the Brscan4
> stuff.
>
> In the next few days I will install this in openSUSE 13.2 RC.
>
> Hope this may help you.
>
> Russ
>




More information about the sane-devel mailing list