[sane-devel] Fujitsu ScanSnap S1100 Scanner

[m. allan noah]

If you have upgraded sane-backends using rolf's ppa, it should be in use. I
assume you have some other home built copy of sane-backends somewhere else
on your system (like /usr/local).

Run the following and send the output:

SANE_DEBUG_EPJITSU=5 scanimage -L

allan

On Tue, Jan 13, 2015 at 6:29 PM, Paul Connor <mrphconnor at gmail.com> wrote:

> I'm not sure how to force xsane to use the development backends that
> should support S1100.
> Can you provide steps?
>
>
> On 11 January 2015 at 21:53, Paul Connor <mrphconnor at gmail.com> wrote:
>
>> I am running xsane 0.998
>>
>> Fujitsu ScanSnaps S1100 is still shown as unsupported on the sane website
>> http://www.sane-project.org/sane-backends.html#S-FUJITSU
>>
>> Ive installed Rolfs API libraries also but don't seem to have detected
>> the scanner.
>>
>> On 4 January 2015 at 13:23, m. allan noah <kitno455 at gmail.com> wrote:
>>
>>> I assume sane-backends has been upgraded from the version I twice helped
>>> you patch previously.  If so, you will likely need to replace sane-backends
>>> again. Fortunately, S1100 support has been added to our development
>>> version, so no patch is needed now. Maybe you can use Rolf's ppa with this
>>> command:  sudo add-apt-repository ppa:rolfbensch/sane-git
>>>
>>> allan
>>>
>>> On Sun, Jan 4, 2015 at 6:24 AM, Paul Connor <mrphconnor at gmail.com>
>>> wrote:
>>>
>>>>
>>>> Im running ubuntu 14.04 32 bit and Xsane was previously working fine
>>>> for years but after a recent update I'm encountering out of memory errors
>>>> on scan attempt.
>>>>
>>>> It seems to be detecting the wrong device for scanning even though I am
>>>> selecting the correct device on startup.
>>>>
>>>> ​
>>>>
>>>> 'sudo sane-find-scanner' returns the correct device
>>>>
>>>> found USB scanner (vendor=0x04c5 [FUJITSU], product=0x1200 [ScanSnap
>>>> S1100]) at libusb:002:003
>>>>
>>>> And I have these details in my /etc/sane.d/epjitsu.conf
>>>>
>>>> but a 'scanimage -L' returns this
>>>>
>>>> device `v4l:/dev/video0' is a Noname 1.3M WebCam virtual device
>>>>
>>>> Can't figure out where it is getting used with my Webcam
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>              to sane-devel-request at lists.alioth.debian.org
>>>>
>>>
>>>
>>>
>>> --
>>> "well, I stand up next to a mountain- and I chop it down with the edge
>>> of my hand"
>>>
>>
>>
>


-- 
"well, I stand up next to a mountain- and I chop it down with the edge of
my hand"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20150114/60078d10/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Selection_014.png
Type: image/png
Size: 68480 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20150114/60078d10/attachment-0001.png>