[sane-devel] Unsupported scanner

[Dario Wimmer]

Please let us know which settings besides lineart you're using on the side  
of your frontends, especially the resolution(dpi).

This looks like something I've seen with a different model in the LiDe  
series but I'm not entirely sure as it's been a while since I had to deal  
with it. Please open a terminal and enter the following command: scanimage  
> test.pnm

Then open the working directory of your bash(usually your home directory),  
find the test.pnm file and check if it's an actual scan of your photo.

Dario




Am .09.2015, 19:18 Uhr, schrieb Zdravko Nikolov  
<zdravko_nikolov_1988 at abv.bg>:

>
> Thank you for the fast reply.
>
> I use the following model -  
> http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/>canoscan_lide_700f
> The drivers for 700F are not functioning. When try to scan photo via  
> flatbed, the scanner doesn`t >move and makes some strange noise.The  
> scanned image is grey lines. I`m including the snapshot. The scanner  
> itself is working, because >I tested today on friend Windows XP.
> Kooka produces similar results.
> Neither flatbed nor transparency adapter are working.
> Zdravko
>
>
>
>
>
>
>
>
> >-------- Оригинално писмо --------
>
> >От: Dario Wimmer dario.wimmer at uni-bielefeld.de
>
> >Относно: Re: [sane-devel] Unsupported scanner
>
> >До: Zdravko Nikolov <zdravko_nikolov_1988 at abv.bg>,
> "m. allan noah" <kitno455 at gmail.com>
>
> >Изпратено на: 13.09.2015 16:30
>
>
> it must be. Canon is not actually listing any scanner under the name  
> "CanoScan 700F" but a "CanoScan LiDe 700F".
>
>
>
> There IS a series of scanners called "CanoScan ####F" without the prefix  
> "LidDe" but all the serial numbers in this series have four digits  
> instead  
> of the "LiDe" series' three digits. So maybe this is a misnomer and the  
> entry "CanoScan 700F" in the list of supported devices should be renamed  
> to "CanoScan LiDe 700F".
>
>
>
> Link to list of CanoScan devices:  
> http://www.usa.canon.com/cusa/categorySiteMap.action?>pageKeyCode=categorySiteMap&nodeCid=0901e02480069f86&expanded=true
>
>
>
> Dario
>
>
>
>
>
>
>
>
>
> Am .09.2015, 15:18 Uhr, schrieb m. allan noah <kitno455 at gmail.com>:
>
>
>
>> CanoScan 700F is listed as supported by the genesys backend. Is that
>
>> not the same scanner?
>
>>
>
>> allan
>
>>
>
>> On Sun, Sep 13, 2015 at 8:50 AM, Zdravko Nikolov
>
>> <zdravko_nikolov_1988 at abv.bg> wrote:
>
>>> Hello,
>
>>> I want to report for unsupported scanner - Canon Canoscan LiDE 700F.
>
>>> It`s not in none of your lists, and I cloudn`t find any driver wich may
>
>>> provide even basic usability.
>
>>> If I can help you with addional information about the scanner - I`d
>
>>> love to
>
>>> help. Unfortunately I don`t have any programming skills.
>
>>> OS - Linux OpenSUSE 13.2
>
>>>
>
>>> With best regards,
>
>>> Zdravko Nikolov
>
>>>
>
>>> --
>
>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>
>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>
>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>
>>>              to sane-devel-request at lists.alioth.debian.org
>
>>
>
>>
>
>>
>
>
>
>
>
> --
> Erstellt mit Operas E-Mail-Modul: http://www.opera.com/mail/