[sane-devel] Set-up Canon i-sensys MF8350cdn network scanner in Sane - Error

[Wilfred - hotmail]

Hi All,

I am trying to get my Canon i-sensys MF8350cdn scanner working over my 
network, but without luck so far. I have also a HP officejet connect to 
the network and that is picked up well.
I get the following output when I run scanimage -L in the debugging mode.

~ $ env SANE_DEBUG_BJNP="5" scanimage -L
[sanei_debug] Setting debug level of bjnp to 5.
[bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26
[bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf: 
mfnp://192.168.1.154
[bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0
[bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup 
succeeded, using as hostname
[bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  
port 8610
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - no data received
[bjnp] bjnp_init_device_structure: Cannot read mac address, skipping 
this scanner
[bjnp] bjnp_allocate_device: Scanner not yet in our list, added it: 
192.168.1.154:8610
[bjnp] get_scanner_id: Get scanner identity
[bjnp]  00000000:4d 46 4e 50 02 30 00 00  00 01 00 00 00 00 00 00
[bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  
port 8610
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - no data received
[bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
[bjnp] add_scanner: ERROR - Cannot read scanner make & model: 
mfnp://192.168.1.154
[bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do 
auto detection...
[bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
[bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast, socket = 3
[bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
[bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast, socket = 4
[bjnp] sanei_find_devices: scanner discovery finished...
device `net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54' is 
a Hewlett-Packard Photosmart_3300_series all-in-one
device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a 
Hewlett-Packard Photosmart_3300_series all-in-one

Does any one have an idea what could be the issue?

Cheers,
WillyN2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20160226/03c33532/attachment.html>