[sane-devel] Set-up Canon i-sensys MF8350cdn network scanner in Sane - Error

[Troels Thomsen]

Did you select "remote scanner" on the front panel of the device?
Otherwise I get the timeouts as well on my mf8230

/Troels

2016-02-26 18:57 GMT+01:00 Wilfred - hotmail <wino1970 at hotmail.com>:
> Hi All,
>
> I am trying to get my Canon i-sensys MF8350cdn scanner working over my
> network, but without luck so far. I have also a HP officejet connect to the
> network and that is picked up well.
> I get the following output when I run scanimage -L in the debugging mode.
>
> ~ $ env SANE_DEBUG_BJNP="5" scanimage -L
> [sanei_debug] Setting debug level of bjnp to 5.
> [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26
> [bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf:
> mfnp://192.168.1.154
> [bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0
> [bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup succeeded,
> using as hostname
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  port
> 8610
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - no data received
> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this
> scanner
> [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it:
> 192.168.1.154:8610
> [bjnp] get_scanner_id: Get scanner identity
> [bjnp]  00000000:4d 46 4e 50 02 30 00 00  00 01 00 00 00 00 00 00
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  port
> 8610
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - select failed: timed out
> [bjnp] udp_command: ERROR - no data received
> [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
> mfnp://192.168.1.154
> [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto
> detection...
> [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
> [bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast, socket = 3
> [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
> [bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast, socket = 4
> [bjnp] sanei_find_devices: scanner discovery finished...
> device `net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a
> Hewlett-Packard Photosmart_3300_series all-in-one
> device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a Hewlett-Packard
> Photosmart_3300_series all-in-one
>
> Does any one have an idea what could be the issue?
>
> Cheers,
> WillyN2
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org