[sane-devel] Set-up Canon i-sensys MF8350cdn network scanner in Sane - Error

[Wilfred - hotmail]

Hi Troels,

I folowed your advice and I tried it with the "remote scanner" scan type 
on, but unfortunately with the same result. Any other thoughts?

Kind regards,

WillyN2

Op 26-02-16 om 23:44 schreef Troels Thomsen:
> Did you select "remote scanner" on the front panel of the device?
> Otherwise I get the timeouts as well on my mf8230
>
> /Troels
>
> 2016-02-26 18:57 GMT+01:00 Wilfred - hotmail <wino1970 at hotmail.com>:
>> Hi All,
>>
>> I am trying to get my Canon i-sensys MF8350cdn scanner working over my
>> network, but without luck so far. I have also a HP officejet connect to the
>> network and that is picked up well.
>> I get the following output when I run scanimage -L in the debugging mode.
>>
>> ~ $ env SANE_DEBUG_BJNP="5" scanimage -L
>> [sanei_debug] Setting debug level of bjnp to 5.
>> [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26
>> [bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf:
>> mfnp://192.168.1.154
>> [bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0
>> [bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup succeeded,
>> using as hostname
>> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  port
>> 8610
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - no data received
>> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this
>> scanner
>> [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it:
>> 192.168.1.154:8610
>> [bjnp] get_scanner_id: Get scanner identity
>> [bjnp]  00000000:4d 46 4e 50 02 30 00 00  00 01 00 00 00 00 00 00
>> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154  port
>> 8610
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - select failed: timed out
>> [bjnp] udp_command: ERROR - no data received
>> [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>> mfnp://192.168.1.154
>> [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto
>> detection...
>> [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
>> [bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast, socket = 3
>> [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
>> [bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast, socket = 4
>> [bjnp] sanei_find_devices: scanner discovery finished...
>> device `net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a
>> Hewlett-Packard Photosmart_3300_series all-in-one
>> device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a Hewlett-Packard
>> Photosmart_3300_series all-in-one
>>
>> Does any one have an idea what could be the issue?
>>
>> Cheers,
>> WillyN2
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>               to sane-devel-request at lists.alioth.debian.org