[sane-devel] Fujitsu ScanSnap S1500 Problems
carl at nextdayvideo.com
Sun Mar 6 00:18:30 UTC 2016
Could it need firmware blob?
11 # These devices require a firmware file in order to function, which
12 # extracted from the Fujitsu Windows driver. Presumably the Mac versions
13 # contain the firmware as well, but the author has no access such a
(see file for instructions)
Here is my "setup on wily" script for my ScanSnap S1100
sudo apt-get install sane-utils
sudo mkdir -p /usr/share/sane/epjitsu
# md5sum /usr/share/sane/epjitsu/1100_0B00.nal
# e851ff36457f899a6540f3d74dc0c9c6 /usr/share/sane/epjitsu/1100_0B00.nal
# found USB scanner (vendor=0x04c5 [FUJITSU], product=0x1200 [ScanSnap
S1100]) at libusb:004:005
# device `epjitsu:libusb:004:005' is a FUJITSU ScanSnap S1100 scanner
On Sat, Mar 5, 2016 at 4:23 PM, simon <simon at strive.io> wrote:
> I should also add that the Fujitsu is seen on the USB bus:
> View this message in context:
> Sent from the SANE - Dev mailing list archive at Nabble.com.
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the sane-devel