[sane-devel] Fujitsu ScanSnap S1500 Problems
m. allan noah
kitno455 at gmail.com
Sun Mar 6 00:29:57 UTC 2016
The S1500 uses the regular fujitsu backend, not epjitsu. It does not
need a firmware upload. In fact, it is basically the fi-5110c without
the user control panel.
On Sat, Mar 5, 2016 at 7:18 PM, Carl Karsten <carl at nextdayvideo.com> wrote:
> Could it need firmware blob?
> /etc/sane.d/epjitsu.conf says:
> 11 # These devices require a firmware file in order to function, which must
> 12 # extracted from the Fujitsu Windows driver. Presumably the Mac versions
> 13 # contain the firmware as well, but the author has no access such a
> (see file for instructions)
> Here is my "setup on wily" script for my ScanSnap S1100
> sudo apt-get install sane-utils
> sudo mkdir -p /usr/share/sane/epjitsu
> cd /usr/share/sane/epjitsu
> sudo wget
> # md5sum /usr/share/sane/epjitsu/1100_0B00.nal
> # e851ff36457f899a6540f3d74dc0c9c6 /usr/share/sane/epjitsu/1100_0B00.nal
> sudo sane-find-scanner
> # found USB scanner (vendor=0x04c5 [FUJITSU], product=0x1200 [ScanSnap
> S1100]) at libusb:004:005
> scanimage -L
> # device `epjitsu:libusb:004:005' is a FUJITSU ScanSnap S1100 scanner
> On Sat, Mar 5, 2016 at 4:23 PM, simon <simon at strive.io> wrote:
>> I should also add that the Fujitsu is seen on the USB bus:
>> View this message in context:
>> Sent from the SANE - Dev mailing list archive at Nabble.com.
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to sane-devel-request at lists.alioth.debian.org
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
More information about the sane-devel