[sane-devel] Canon MG6650 (6600 Series)

[rpk]

Dear Ladies and Gentlemen,

sending you the result by "sane-find-scanner" below. The Problem is that 
sane does not find the scanner.
It would be great if you can help.

Yours Sincerely

Rolf-Peter Kraft
mailto:mail at rolf-peter-kraft.de


sudo sane-find-scanner

[sudo] password for rpk:

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

   # No SCSI scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x0bda [Manufacturer Realtek ], product=0x8174 
[RTL8192S WLAN Adapter ]) at libusb:004:003
found USB scanner (vendor=0x04a9 [Canon], product=0x177e [MG6600 
series]) at libusb:001:002
   # Your USB scanner was (probably) detected. It may or may not be 
supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary ports
   # can't be detected by this program.