[sane-devel] I/O Errors with hp 7400c
wd-p at trolink.de
Wed Nov 2 18:47:20 UTC 2016
my HP scanjet 7400c worked nicely over many years with ubuntu.
Now, for no reason I can see, it starts to throw I/O errors - the same
on the desktop with ubuntu 16.10 and the laptop 16.04. - I suspect, it
might be a hardware issue, but would be grateful for experts' hints
before I trash the device.
"scanimage -L" takes something like 20sec to provide a result, and
scanning by "scanimage >test.pwm" takes around a minute to create any
reaction, usually then it stops. All USB devices will be blocked then,
I only can reboot the machine.
On terminal, I can read "scanimage: sane_read: Error during device
I/O". In these cases, a 0byte file is written. This happens mostly, not
always, occasionally a successful scan happens.
This is what I can find in syslog:
Nov 2 19:12:18 Simux kernel: [ 50.836033] usb 2-9: new full-speed
USB device number 5 using ohci-pci
Nov 2 19:12:18 Simux kernel: [ 51.065650] usb 2-9: New USB device
found, idVendor=03f0, idProduct=0801
Nov 2 19:12:18 Simux kernel: [ 51.065653] usb 2-9: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Nov 2 19:12:18 Simux kernel: [ 51.065654] usb 2-9: Product: hp
Nov 2 19:12:18 Simux kernel: [ 51.065655] usb 2-9: Manufacturer: hp
Nov 2 19:12:18 Simux kernel: [ 51.065656] usb 2-9: SerialNumber:
Nov 2 19:14:37 Simux kernel: [ 190.249653] usb 2-9: USB disconnect,
device number 5
Nov 2 19:14:37 Simux kernel: [ 190.256147] scanimage: segfault
at 7f90f61ef64c ip 00007f90f61ef64c sp 00007f90f5db8f10 error 14 in
IU'd be grateful if all this would speak to somebody who can geive me
some advice what to do.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the sane-devel