[sane-devel] Compatibility of the Irisscan executive 4 scanner

[Olaf Meeuwissen]

Hi Alex,

Sorry for the belated follow-up.

Alex ARNAUD writes:

> Le 28/09/2017 à 15:45, Olaf Meeuwissen a écrit:
>> Hi Alex,
>>
>> Based on a quick `git grep -i iris` on the sane-backends source code,
>> the only Irisscan device known to be supported is the "Express 2".  If
>> the "executive 4" has a USB port, could you provide the USB product ID?
>>
>> Connect the device, power it up, run `lsusb` and post the output.
>
> Hi Olaf,
>
> This is what I get when I plug the device and look at dmesg:
>
>> 469.816835] usb 1-6.3: new high-speed USB device number 13 using xhci_hcd
>> [  469.921775] usb 1-6.3: New USB device found, idVendor=0a38, idProduct=0162
>> [  469.921779] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [  469.921782] usb 1-6.3: Product: IRIScanExec4
>> [  469.921784] usb 1-6.3: Manufacturer: IRIS
>> [  469.921787] usb 1-6.3: SerialNumber: A08805056B700953
>
> Best regards.

The only entry we have for idVendor=0a38 has idProduct=0301 and it's in
the list of unsupported devices :-(

 http://sane-project.org/cgi-bin/driver.pl?manu=&model=&bus=any&v=0a38&p=0301

Hope this helps (guess it doesn't),
--
Olaf Meeuwissen, LPIC-2            FSF Associate Member since 2004-01-27
 GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13  F43E B8A4 A88A F84A 2DD9
 Support Free Software                        https://my.fsf.org/donate
 Join the Free Software Foundation              https://my.fsf.org/join