[sane-devel] [inactive] options

[Olaf Meeuwissen]

Hi,

ylafont writes:

> I am trying to scan legal size pager over the ADF,   when setting the Scan
> area to legal on the command line, they are changed  back to letter size
>
> *scanimage: rounded value of br-x from 215.9 to 215.872
> scanimage: rounded value of br-y from 355.6 to 279.364
> *
>
> There are inactive options listed for the backend,  Is there a method of
> activating them for this purpose?
>
> *All options specific to device `net:localhost:fujitsu:fi-4220C2dj:100742':
> *
>   Geometry:
>     -l 0..224.846mm (in steps of 0.0211639) [0]
>         Top-left x position of scan area.
>     -t 0..296.972mm (in steps of 0.0211639) [0]
>         Top-left y position of scan area.
>     -x 0..224.846mm (in steps of 0.0211639) [215.872]
>         Width of scan-area.
>     -y 0..296.972mm (in steps of 0.0211639) [279.364]
>         Height of scan-area.
>    * --page-width 0..224.846mm (in steps of 0.0211639) [inactive]*
>         Specifies the width of the media.  Required for automatic centering
> of
>     *    sheet-fed scans.
>     --page-height 0..863.489mm (in steps of 0.0211639) [inactive]*
>         Specifies the height of the media.

Are these *really* *all* the options?  I'd expect some option to select
the APF (assuming this device also does flatbed/glass plate).  If there
is such an option, try fiddling with the ordering.  Specifically, put
the option selecting the ADF first.

> *backend - fujitsu:fi-4220C2dj:*
>
> *scanimage (sane-backends) 1.0.22; backend version 1.0.22*
>
> Any assistance is greatly appreciated.  Thank you in advance.

Hope this helps,
--
Olaf Meeuwissen, LPIC-2            FSF Associate Member since 2004-01-27
 GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13  F43E B8A4 A88A F84A 2DD9
 Support Free Software                        https://my.fsf.org/donate
 Join the Free Software Foundation              https://my.fsf.org/join