[sane-devel] [inactive] options

m. allan noah kitno455 at gmail.com
Thu Nov 30 12:14:38 UTC 2017

The page size options are disabled when you are using the flatbed, but
you should not need them. The bounds of the x/y options should be set
to the maximum supported by the flatbed in that case. It is possible
this is a bug in the old version of sane-backends you are using. Can
you provide your complete command line you are using with scanimage,
and all the options as listed by scanimage --help?

Also, please don't use nabble. It lies and says the emails came from
yahoo when they did not, which causes your mail to be sent to spam


On Wed, Nov 29, 2017 at 10:34 AM, ylafont <ylafont at yahoo.com> wrote:
> I am trying to scan legal size pager over the ADF,   when setting the Scan
> area to legal on the command line, they are changed  back to letter size
> *scanimage: rounded value of br-x from 215.9 to 215.872
> scanimage: rounded value of br-y from 355.6 to 279.364
> *
> There are inactive options listed for the backend,  Is there a method of
> activating them for this purpose?
> *All options specific to device `net:localhost:fujitsu:fi-4220C2dj:100742':
> *
>   Geometry:
>     -l 0..224.846mm (in steps of 0.0211639) [0]
>         Top-left x position of scan area.
>     -t 0..296.972mm (in steps of 0.0211639) [0]
>         Top-left y position of scan area.
>     -x 0..224.846mm (in steps of 0.0211639) [215.872]
>         Width of scan-area.
>     -y 0..296.972mm (in steps of 0.0211639) [279.364]
>         Height of scan-area.
>    * --page-width 0..224.846mm (in steps of 0.0211639) [inactive]*
>         Specifies the width of the media.  Required for automatic centering
> of
>     *    sheet-fed scans.
>     --page-height 0..863.489mm (in steps of 0.0211639) [inactive]*
>         Specifies the height of the media.
> *backend - fujitsu:fi-4220C2dj:*
> *scanimage (sane-backends) 1.0.22; backend version 1.0.22*
> Any assistance is greatly appreciated.  Thank you in advance.
> --
> Sent from: http://sane.10972.n7.nabble.com/SANE-Dev-f3.html
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org

"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"

More information about the sane-devel mailing list