[sane-devel] Fujitsu iX500 - No scanners were identified.
m. allan noah
kitno455 at gmail.com
Sun Oct 22 12:21:46 UTC 2017
What was the outcome from my suggestions last year?
allan
On Sat, Oct 21, 2017 at 12:09 PM, Jiri Kanicky <j at ganomi.com> wrote:
> Hi,
>
> I know this is old topic, but I just would like to everyone know that:
>
> 1. When I use USB 3.0 Type B Plug connector (cable which comes with the
> scanner), scanimage -L recognizes the scanner only once and applications like
> Simple Scan or Skanlite are not able to scan.
>
> 2. However when I use USB 2.0 Type B Plug connector (i used cable from my
> externar HDD), everything seems to work just fine.
>
> My notebook has got all USB ports USB 3.0 and I don't have USB 2 hub to test.
>
> Anyway using cable with old USB 2.0 B plug is simple workaround.
>
> If I can provide any debug data, which can help to fix the issue, please let me
> know and I can provide it for both cables.
>
> - Jiri
>
> On Monday, 21 November 2016 9:02:21 PM AEDT m. allan noah wrote:
>> You did not tell us what you upgraded? Sane-backends, your scanner, your
>> kernel?
>>
>> This sounds like a pretty typical linux usb bug. You might need to
>> install a development version of sane-backends from our git repo. Once
>> you have built and installed a sane-backends git snapshot (using the
>> info in README.linux), you can run scanimage -L repeatedly. You may
>> find that the scanner only shows up intermittently. If that is the
>> case, try running this repeatedly instead:
>>
>> SANE_USB_WORKAROUND=1 scanimage -L
>>
>> That might work better. If so, you will have to put
>> SANE_USB_WORKAROUND=1 into your environment.
>>
>> Oh, and BTW, your scanner is not supported by the snapscan backend.
>> Try fujitsu instead.
>>
>> allan
>>
>> On Mon, Nov 21, 2016 at 6:40 AM, Jiri <j at ganomi.com> wrote:
>> > Hi,
>> >
>> > [Debian Sid]
>> >
>> > I started having problem with Fujitsu iX500 scanner after upgrade. It used
>> > to work fine, but now it seems the system identifies the scanner for a
>> > just
>> > a while and but apps cannot use it.
>> >
>> > Here is example. I run the following command two times right after each
>> > other. The scanner is recognized on first run (after plugging USB in), but
>> > when I run it second time it says the scanner was not identified.
>> >
>> > Any help would be appreciated.
>> >
>> >
>> > ganomi at knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L
>> > [sanei_debug] Setting debug level of fujitsu to 15.
>> > [fujitsu] sane_init: start
>> > [fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
>> > [fujitsu] sane_init: finish
>> > [fujitsu] sane_get_devices: start
>> > [fujitsu] sane_get_devices: reading config file fujitsu.conf
>> > [fujitsu] sane_get_devices: setting "buffer-size" to 65536
>> > [fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
>> > [fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
>> > 65536, warning!
>> > [fujitsu] sane_get_devices: setting "buffer-size" to 262144
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
>> > [fujitsu] attach_one: start
>> > [fujitsu] attach_one: looking for 'libusb:003:004'
>> > [fujitsu] connect_fd: start
>> > [fujitsu] connect_fd: opening USB device
>> > [fujitsu] wait_scanner: start
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] do_usb_cmd: finish
>> > [fujitsu] wait_scanner: finish
>> > [fujitsu] connect_fd: finish
>> > [fujitsu] init_inquire: start
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] do_usb_cmd: finish
>> > [fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version 0L00
>> > at libusb:003:004
>> > [fujitsu] inquiry options
>> > [fujitsu] color offset: 0 lines
>> > [fujitsu] long gray scan: 1
>> > [fujitsu] long color scan: 1
>> > [fujitsu] emulation mode: 0
>> > [fujitsu] CMP/CGA: 0
>> > [fujitsu] background back: 0
>> > [fujitsu] background front: 0
>> > [fujitsu] background fb: 0
>> > [fujitsu] back only scan: 1
>> > [fujitsu] duplex offset: 0 lines
>> > [fujitsu] init_inquire: finish
>> > [fujitsu] init_vpd: start
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] do_usb_cmd: finish
>> > [fujitsu] init_vpd: length=8b
>> > [fujitsu] standard options
>> > [fujitsu] basic x res: 600 dpi
>> > [fujitsu] basic y res: 600 dpi
>> > [fujitsu] step x res: 1 dpi
>> > [fujitsu] step y res: 1 dpi
>> > [fujitsu] max x res: 600 dpi
>> > [fujitsu] max y res: 600 dpi
>> > [fujitsu] min x res: 50 dpi
>> > [fujitsu] min y res: 50 dpi
>> > [fujitsu] 60 dpi: 1
>> > [fujitsu] 75 dpi: 1
>> > [fujitsu] 100 dpi: 1
>> > [fujitsu] 120 dpi: 1
>> > [fujitsu] 150 dpi: 1
>> > [fujitsu] 160 dpi: 1
>> > [fujitsu] 180 dpi: 1
>> > [fujitsu] 200 dpi: 1
>> > [fujitsu] 240 dpi: 1
>> > [fujitsu] 300 dpi: 1
>> > [fujitsu] 320 dpi: 1
>> > [fujitsu] 400 dpi: 1
>> > [fujitsu] 480 dpi: 1
>> > [fujitsu] 600 dpi: 1
>> > [fujitsu] 800 dpi: 0
>> > [fujitsu] 1200 dpi: 0
>> > [fujitsu] max width: 8.71 inches
>> > [fujitsu] max length: 34.52 inches
>> > [fujitsu] overflow: 1
>> > [fujitsu] monochrome: 1
>> > [fujitsu] halftone: 1
>> > [fujitsu] grayscale: 1
>> > [fujitsu] color_monochrome: 0
>> > [fujitsu] color_halftone: 0
>> > [fujitsu] color_grayscale: 1
>> > [fujitsu] vendor options
>> > [fujitsu] adf: 1
>> > [fujitsu] flatbed: 0
>> > [fujitsu] transparency: 0
>> > [fujitsu] duplex: 1
>> > [fujitsu] back endorser: 0
>> > [fujitsu] barcode: 0
>> > [fujitsu] operator panel: 1
>> > [fujitsu] front endorser: 0
>> > [fujitsu] multi-purpose stacker: 0
>> > [fujitsu] prepick: 0
>> > [fujitsu] mf detect: 0
>> > [fujitsu] paper protection: 0
>> > [fujitsu] A/D bits: 10
>> > [fujitsu] buffer bytes: 402653184
>> > [fujitsu] Standard commands
>> > [fujitsu] mode_sense_10 cmd: 0
>> > [fujitsu] mode_select_10 cmd: 0
>> > [fujitsu] log_sense cmd: 0
>> > [fujitsu] log_select cmd: 0
>> > [fujitsu] change cmd: 0
>> > [fujitsu] read_buffer cmd: 0
>> > [fujitsu] write_buffer cmd: 0
>> > [fujitsu] copy_and_verify cmd: 0
>> > [fujitsu] compare cmd: 0
>> > [fujitsu] get_d_b_status cmd: 0
>> > [fujitsu] object_pos cmd: 1
>> > [fujitsu] send cmd: 1
>> > [fujitsu] read cmd: 1
>> > [fujitsu] get_window cmd: 0
>> > [fujitsu] set_window cmd: 1
>> > [fujitsu] send_diag cmd: 1
>> > [fujitsu] read_diag cmd: 1
>> > [fujitsu] scan cmd: 1
>> > [fujitsu] mode_sense_6 cmd: 1
>> > [fujitsu] copy cmd: 0
>> > [fujitsu] release cmd: 1
>> > [fujitsu] reserve_unit cmd: 1
>> > [fujitsu] mode_select_6 cmd: 1
>> > [fujitsu] inquiry cmd: 1
>> > [fujitsu] request_sense cmd: 1
>> > [fujitsu] test_unit_ready cmd: 1
>> > [fujitsu] Vendor commands
>> > [fujitsu] subwindow cmd: 0
>> > [fujitsu] endorser cmd: 0
>> > [fujitsu] hardware status cmd: 1
>> > [fujitsu] hardware status 2 cmd: 0
>> > [fujitsu] hardware status 3 cmd: 0
>> > [fujitsu] scanner control cmd: 1
>> > [fujitsu] device restart cmd: 1
>> > [fujitsu] brightness steps: 0
>> > [fujitsu] threshold steps: 255
>> > [fujitsu] contrast steps: 0
>> > [fujitsu] built in gamma patterns: 0
>> > [fujitsu] download gamma patterns: 1
>> > [fujitsu] built in dither patterns: 4
>> > [fujitsu] download dither patterns: 1
>> > [fujitsu] RIF: 1
>> > [fujitsu] DTC (AutoI): 0
>> > [fujitsu] SDTC (AutoII): 1
>> > [fujitsu] outline extraction: 0
>> > [fujitsu] image emphasis: 1
>> > [fujitsu] automatic separation: 0
>> > [fujitsu] mirror image: 0
>> > [fujitsu] white level follower: 0
>> > [fujitsu] subwindow: 0
>> > [fujitsu] diffusion: 1
>> > [fujitsu] ipc3: 0
>> > [fujitsu] rotation: 0
>> > [fujitsu] hybrid crop deskew: 0
>> > [fujitsu] ipc2 byte 67: 0
>> > [fujitsu] compression MH: 0
>> > [fujitsu] compression MR: 0
>> > [fujitsu] compression MMR: 0
>> > [fujitsu] compression JBIG: 0
>> > [fujitsu] compression JPG1: 1
>> > [fujitsu] (Disabled)
>> > [fujitsu] compression JPG2: 0
>> > [fujitsu] compression JPG3: 0
>> > [fujitsu] back endorser mech: 0
>> > [fujitsu] back endorser stamp: 0
>> > [fujitsu] back endorser elec: 0
>> > [fujitsu] endorser max id: 0
>> > [fujitsu] front endorser mech: 0
>> > [fujitsu] front endorser stamp: 0
>> > [fujitsu] front endorser elec: 0
>> > [fujitsu] back endorser type: 0
>> > [fujitsu] back endorser type: 0
>> > [fujitsu] connection type: 3
>> > [fujitsu] endorser ext: 0
>> > [fujitsu] endorser pr_b: 0
>> > [fujitsu] endorser pr_f: 0
>> > [fujitsu] endorser po_b: 0
>> > [fujitsu] endorser po_f: 0
>> > [fujitsu] horizontal overscan: 153
>> > [fujitsu] vertical overscan: 153
>> > [fujitsu] default bg adf b: 0
>> > [fujitsu] default bg adf f: 0
>> > [fujitsu] default bg fb: 0
>> > [fujitsu] auto color: 1
>> > [fujitsu] blank skip: 1
>> > [fujitsu] multi image: 0
>> > [fujitsu] f b type indep: 0
>> > [fujitsu] f b res indep: 0
>> > [fujitsu] dropout spec: 0
>> > [fujitsu] dropout non: 0
>> > [fujitsu] dropout white: 0
>> > [fujitsu] skew check: 0
>> > [fujitsu] new feed roller: 0
>> > [fujitsu] paper count: 0
>> > [fujitsu] paper number: 0
>> > [fujitsu] ext send to: 0
>> > [fujitsu] staple det: 0
>> > [fujitsu] pause host: 0
>> > [fujitsu] pause panel: 0
>> > [fujitsu] pause conf: 0
>> > [fujitsu] hq print: 0
>> > [fujitsu] ext GHS len: 0
>> > [fujitsu] smbc func: 0
>> > [fujitsu] imprint chk b: 0
>> > [fujitsu] imprint chk f: 0
>> > [fujitsu] force w bg: 0
>> > [fujitsu] mf recover lvl: 0
>> > [fujitsu] first read time: 1
>> > [fujitsu] div scanning: 0
>> > [fujitsu] start job: 1
>> > [fujitsu] lifetime log: 1
>> > [fujitsu] imff save rest: 0
>> > [fujitsu] wide scsi type: 0
>> > [fujitsu] lut hybrid crop: 0
>> > [fujitsu] over under amt: 0
>> > [fujitsu] rgb lut: 0
>> > [fujitsu] num lut dl: 0
>> > [fujitsu] ErP Lot6 (power off timer): 1
>> > [fujitsu] sync next feed: 1
>> > [fujitsu] object postion halt: 0
>> > [fujitsu] init_vpd: finish
>> > [fujitsu] init_ms: start
>> > [fujitsu] autocolor: 0
>> > [fujitsu] prepick: 0
>> > [fujitsu] sleep: 0
>> > [fujitsu] duplex: 0
>> > [fujitsu] rand: 0
>> > [fujitsu] bg: 0
>> > [fujitsu] df: 0
>> > [fujitsu] dropout: 0
>> > [fujitsu] buff: 0
>> > [fujitsu] auto: 0
>> > [fujitsu] lamp: 0
>> > [fujitsu] jobsep: 0
>> > [fujitsu] init_ms: finish
>> > [fujitsu] init_model: start
>> > [fujitsu] init_model: finish
>> > [fujitsu] init_user: start
>> > [fujitsu] init_user: finish
>> > [fujitsu] init_options: start
>> > [fujitsu] init_options: finish
>> > [fujitsu] init_interlace: start
>> > [fujitsu] update_params: start
>> > [fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
>> > [fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600
>> > [fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
>> > [fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
>> > [fujitsu] update_params: params: format=1, depth=8, last=1
>> > [fujitsu] update_u_params: start
>> > [fujitsu] update_u_params: finish
>> > [fujitsu] update_params: finish
>> > [fujitsu] init_interlace: color_interlace: 1
>> > [fujitsu] init_interlace: finish
>> > [fujitsu] init_serial: start
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] do_usb_cmd: finish
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] do_usb_cmd: finish
>> > [fujitsu] init_serial: found sn 64324
>> > [fujitsu] init_serial: serial_name: ScanSnap iX500:64324
>> > [fujitsu] init_serial: finish
>> > [fujitsu] disconnect_fd: start
>> > [fujitsu] disconnecting usb device
>> > [fujitsu] disconnect_fd: finish
>> > [fujitsu] attach_one: finish
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
>> > [fujitsu] sane_get_devices: found scanner libusb:003:004
>> > [fujitsu] sane_get_devices: found 1 scanner(s)
>> > [fujitsu] sane_get_devices: finish
>> > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
>> > [fujitsu] sane_exit: start
>> > [fujitsu] disconnect_fd: start
>> > [fujitsu] disconnect_fd: finish
>> > [fujitsu] sane_exit: finish
>> > ganomi at knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L
>> > [sanei_debug] Setting debug level of fujitsu to 15.
>> > [fujitsu] sane_init: start
>> > [fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
>> > [fujitsu] sane_init: finish
>> > [fujitsu] sane_get_devices: start
>> > [fujitsu] sane_get_devices: reading config file fujitsu.conf
>> > [fujitsu] sane_get_devices: setting "buffer-size" to 65536
>> > [fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
>> > [fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
>> > 65536, warning!
>> > [fujitsu] sane_get_devices: setting "buffer-size" to 262144
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
>> > [fujitsu] attach_one: start
>> > [fujitsu] attach_one: looking for 'libusb:003:004'
>> > [fujitsu] connect_fd: start
>> > [fujitsu] connect_fd: opening USB device
>> > [fujitsu] wait_scanner: start
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] stat: return error 'Error during device I/O'
>> > [fujitsu] WARNING: Brain-dead scanner. Hitting with stick
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] stat: return error 'Error during device I/O'
>> > [fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
>> > [fujitsu] do_usb_cmd: start
>> > [fujitsu] stat: return error 'Error during device I/O'
>> > [fujitsu] wait_scanner: error 'Error during device I/O'
>> > [fujitsu] wait_scanner: finish
>> > [fujitsu] connect_fd: could not wait_scanner
>> > [fujitsu] disconnect_fd: start
>> > [fujitsu] disconnecting usb device
>> > [fujitsu] disconnect_fd: finish
>> > [fujitsu] connect_fd: finish
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
>> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
>> > [fujitsu] sane_get_devices: found 0 scanner(s)
>> > [fujitsu] sane_get_devices: finish
>> >
>> > No scanners were identified. If you were expecting something different,
>> > check that the scanner is plugged in, turned on and detected by the
>> > sane-find-scanner tool (if appropriate). Please read the documentation
>> > which came with this software (README, FAQ, manpages).
>> > [fujitsu] sane_exit: start
>> > [fujitsu] sane_exit: finish
>> > ganomi at knightrider:~$ sane-find-scanner
>> >
>> > # sane-find-scanner will now attempt to detect your scanner. If the
>> > # result is different from what you expected, first make sure your
>> > # scanner is powered up and properly connected to your computer.
>> >
>> > # No SCSI scanners found. If you expected something different, make sure
>> >
>> > that
>> >
>> > # you have loaded a kernel SCSI driver for your SCSI adapter.
>> >
>> > could not open USB device 0x8087/0x8001 at 001:002: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
>> > (insufficient permissions)
>> > found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap
>> > iX500]) at libusb:003:004
>> > could not open USB device 0x1d6b/0x0003 at 003:001: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x04f2/0xb45d at 002:005: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x8087/0x0a2a at 002:004: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x138a/0x0017 at 002:003: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x04f3/0x012d at 002:002: Access denied
>> > (insufficient permissions)
>> > could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
>> > (insufficient permissions)
>> >
>> > # Your USB scanner was (probably) detected. It may or may not be
>> > supported
>> >
>> > by
>> >
>> > # SANE. Try scanimage -L and read the backend's manpage.
>> >
>> > # Not checking for parallel port scanners.
>> >
>> > # Most Scanners connected to the parallel port or other proprietary
>> > ports
>> > # can't be detected by this program.
>> >
>> > # You may want to run this program as root to find all devices. Once you
>> > # found the scanner devices, be sure to adjust access permissions as
>> > # necessary
>> >
>> > Again after I plug the USB in my computer...
>> >
>> > ganomi at knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L
>> > [sanei_debug] Setting debug level of snapscan to 128.
>> > [snapscan] sane_snapscan_init
>> > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
>> > [snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0)
>> > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
>> > [snapscan] sane_snapscan_exit
>> >
>> > ganomi at knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L
>> > [sanei_debug] Setting debug level of snapscan to 128.
>> > [snapscan] sane_snapscan_init
>> > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
>> > [snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0)
>> >
>> > No scanners were identified. If you were expecting something different,
>> > check that the scanner is plugged in, turned on and detected by the
>> > sane-find-scanner tool (if appropriate). Please read the documentation
>> > which came with this software (README, FAQ, manpages).
>> > [snapscan] sane_snapscan_exit
>> >
>> >
>> > Thanks Jiri
>> >
>> > --
>> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>> > Unsubscribe: Send mail with subject "unsubscribe your_password"
>> >
>> > to sane-devel-request at lists.alioth.debian.org
>
>
--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
More information about the sane-devel
mailing list