[sane-devel] canon pixma mf211

[János Gerzson]

Hello,

I am struggling for a long time with this particular model.
Once I got an info that it's fully supported, but I still no clue.
According to the official page its status is untested.

I am on Ubuntu Mate 17.10, kernel 4.13, sane 1.0.27

sane-find-scanner:
found USB scanner (vendor=0x04a9 [Language Error], product=0x27a9 [Language
Error]) at libusb:001:004

scanimage -L:
device `pixma:04A927A9_0165OE504DB8' is a CANON Canon i-SENSYS MF210 Series
multi-function peripheral

scanimage -T:
scanimage: scanning image of size 640x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1920 bytes...  PASS
scanimage: reading one byte...          PASS
scanimage: stepped read, 2 bytes...     PASS
scanimage: stepped read, 4 bytes...     PASS
scanimage: stepped read, 8 bytes...     PASS
scanimage: stepped read, 16 bytes...    PASS
scanimage: stepped read, 32 bytes...    PASS
scanimage: stepped read, 64 bytes...    PASS
scanimage: stepped read, 128 bytes...   PASS
scanimage: stepped read, 256 bytes...   PASS
scanimage: stepped read, 512 bytes...   PASS
scanimage: stepped read, 1024 bytes...  PASS
scanimage: stepped read, 2048 bytes...  PASS
scanimage: stepped read, 2047 bytes...  PASS
scanimage: stepped read, 1023 bytes...  PASS
scanimage: stepped read, 511 bytes...   PASS
scanimage: stepped read, 255 bytes...   PASS
scanimage: stepped read, 127 bytes...   PASS
scanimage: stepped read, 63 bytes...    PASS
scanimage: stepped read, 31 bytes...    PASS
scanimage: stepped read, 15 bytes...    PASS
scanimage: stepped read, 7 bytes...     PASS
scanimage: stepped read, 3 bytes...     PASS

My experience is that it halts right after start.

Is there any special configuration, udev, etc needed?

Thanks in advance!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20180214/8e956caf/attachment.html>