[sane-devel] sane-pixma TS6150

[Rolf Bensch]

Hi Giles,

I'm sorry to tell you that your scanner isn't supported by SANE. You
confuse your TS6150 with the TS6050 (PIXMA TS6000 Series).

There's another problem with the tested TSxxxx scanners: WiFi isn't working.

I can quickly implement your scanner to SANE, but you very probably need
to use the scanner USB connected to your PC. Please send me your
scanner's USB IDs, which can be indentified on a console with:
$ lsusb
Bus 002 Device 007: ID 04a9:1908 Canon, Inc.
...

Hope this helps.

Cheers,
Rolf


Am 03.09.2018 um 18:30 schrieb Giles Knap:
> Hello,
>
> I'm testing the latest pixma support against the TS6150 which is
> listed as not yet tested.
>
> I can't connect over USB or TCP even if I explicitly place my device's
> IP address in /etc/sane.d/pixma.conf as follows:-
>
> bjnp-timeout=5000
> bjnp://192.168.0.100:8612 <http://192.168.0.100:8612>
>
> I am running on Ubuntu 18.04.1 and have built from the latest source
> in master branch of https://gitlab.com/sane-project/backends.
>
> The compilation is with debug and I get the following output pasted below.
>
> The device is working since I am able to scan in an incredibly limited
> fashion using the official scangearmp2 (which I have since
> uninstalled). The device also works if I reboot to windows.
>
> ----------------------------------------------
> giles at gklinux:~/github/backends$ SANE_DEBUG_PIXMA=21 SANE_DEBUG_BJNP=3
> simple-scan
>
> (simple-scan:15264): Gtk-WARNING **: 17:10:07.715: Failed to register
> client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable
> to register client
> [sanei_debug] Setting debug level of pixma to 21.
> [pixma] pixma is compiled with pthread support.
> [pixma] pixma version 0.17.49
> [sanei_debug] Setting debug level of bjnp to 3.
> [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.49
> [bjnp] Set new default timeout value: 5000 ms.[bjnp]
> sanei_bjnp_find_devices: Adding scanner from pixma.conf:
> bjnp://192.168.0.100:8612 <http://192.168.0.100:8612>
> [bjnp] bjnp_allocate_device(bjnp://192.168.0.100:8612/timeout=5000
> <http://192.168.0.100:8612/timeout=5000>) 0
> [bjnp] get_scanner_name: Name for 192.168.0.100 not found : Name or
> service not known
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100 
> port 8612
> [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - no data received (timeout = 5000)
> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping
> this scanner
> [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it:
> 192.168.0.100:8612 <http://192.168.0.100:8612>
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100 
> port 8612
> [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - no data received (timeout = 5000)
> [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
> bjnp://192.168.0.100:8612/timeout=5000
> <http://192.168.0.100:8612/timeout=5000>
> [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do
> auto detection...
> [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
> [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast, socket
> = 50
> [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket
> = 51
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket
> = 52
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket
> = 53
> [bjnp] sanei_find_devices: scanner discovery finished...
> [pixma] pixma_find_scanners() found 0 devices
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20180912/6dd5fd0e/attachment.html>