[sane-devel] sane-pixma TS6150

[Giles Knap]

Many thanks, Rolf.

I would be very happy to have my scanner working via USB.

The USB IDs are as follows:-
Bus 002 Device 005: ID 04a9:1822 Canon, Inc.

Cheers,
giles

On Wed, Sep 12, 2018 at 6:41 PM Rolf Bensch <rolf at bensch-online.de> wrote:

> Hi Giles,
>
> I'm sorry to tell you that your scanner isn't supported by SANE. You
> confuse your TS6150 with the TS6050 (PIXMA TS6000 Series).
>
> There's another problem with the tested TSxxxx scanners: WiFi isn't
> working.
>
> I can quickly implement your scanner to SANE, but you very probably need
> to use the scanner USB connected to your PC. Please send me your scanner's
> USB IDs, which can be indentified on a console with:
> $ lsusb
> Bus 002 Device 007: ID 04a9:1908 Canon, Inc.
> ...
>
> Hope this helps.
>
> Cheers,
> Rolf
>
> Am 03.09.2018 um 18:30 schrieb Giles Knap:
>
> Hello,
>
> I'm testing the latest pixma support against the TS6150 which is listed as
> not yet tested.
>
> I can't connect over USB or TCP even if I explicitly place my device's IP
> address in /etc/sane.d/pixma.conf as follows:-
>
> bjnp-timeout=5000
> bjnp://192.168.0.100:8612
>
> I am running on Ubuntu 18.04.1 and have built from the latest source in
> master branch of https://gitlab.com/sane-project/backends.
>
> The compilation is with debug and I get the following output pasted below.
>
> The device is working since I am able to scan in an incredibly limited
> fashion using the official scangearmp2 (which I have since uninstalled).
> The device also works if I reboot to windows.
>
> ----------------------------------------------
> giles at gklinux:~/github/backends$ SANE_DEBUG_PIXMA=21 SANE_DEBUG_BJNP=3
> simple-scan
>
> (simple-scan:15264): Gtk-WARNING **: 17:10:07.715: Failed to register
> client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to
> register client
> [sanei_debug] Setting debug level of pixma to 21.
> [pixma] pixma is compiled with pthread support.
> [pixma] pixma version 0.17.49
> [sanei_debug] Setting debug level of bjnp to 3.
> [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.49
> [bjnp] Set new default timeout value: 5000 ms.[bjnp]
> sanei_bjnp_find_devices: Adding scanner from pixma.conf: bjnp://
> 192.168.0.100:8612
> [bjnp] bjnp_allocate_device(bjnp://192.168.0.100:8612/timeout=5000) 0
> [bjnp] get_scanner_name: Name for 192.168.0.100 not found : Name or
> service not known
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100
> port 8612
> [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command:
> ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - no data
> received (timeout = 5000)
> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this
> scanner
> [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it:
> 192.168.0.100:8612
> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100
> port 8612
> [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
> udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command:
> ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - no data
> received (timeout = 5000)
> [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
> [bjnp] add_scanner: ERROR - Cannot read scanner make & model: bjnp://
> 192.168.0.100:8612/timeout=5000
> [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto
> detection...
> [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
> [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast, socket = 50
> [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 51
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 52
> [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 53
> [bjnp] sanei_find_devices: scanner discovery finished...
> [pixma] pixma_find_scanners() found 0 devices
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20180912/51670f42/attachment.html>