[sane-devel] sane-pixma TS6150

[Rolf Bensch]

Hi Giles,

I just added your scanner to SANE. You can pull the recent version from
git now.

Or you can use my Ubuntu PPA:
https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git . Then you
must wait for the next version tomorrow.

Please report your results.

Cheers,
Rolf

Am 12.09.2018 um 20:40 schrieb Giles Knap:
> Many thanks, Rolf.
> 
> I would be very happy to have my scanner working via USB.
> 
> The USB IDs are as follows:-
> Bus 002 Device 005: ID 04a9:1822 Canon, Inc. 
> 
> Cheers,
> giles
> 
> On Wed, Sep 12, 2018 at 6:41 PM Rolf Bensch <rolf at bensch-online.de
> <mailto:rolf at bensch-online.de>> wrote:
> 
>     Hi Giles,
> 
>     I'm sorry to tell you that your scanner isn't supported by SANE. You
>     confuse your TS6150 with the TS6050 (PIXMA TS6000 Series).
> 
>     There's another problem with the tested TSxxxx scanners: WiFi isn't
>     working.
> 
>     I can quickly implement your scanner to SANE, but you very probably
>     need to use the scanner USB connected to your PC. Please send me
>     your scanner's USB IDs, which can be indentified on a console with:
>     $ lsusb
>     Bus 002 Device 007: ID 04a9:1908 Canon, Inc.
>     ...
> 
>     Hope this helps.
> 
>     Cheers,
>     Rolf
> 
> 
>     Am 03.09.2018 um 18:30 schrieb Giles Knap:
>>     Hello,
>>
>>     I'm testing the latest pixma support against the TS6150 which is
>>     listed as not yet tested.
>>
>>     I can't connect over USB or TCP even if I explicitly place my
>>     device's IP address in /etc/sane.d/pixma.conf as follows:-
>>
>>     bjnp-timeout=5000
>>     bjnp://192.168.0.100:8612 <http://192.168.0.100:8612>
>>
>>     I am running on Ubuntu 18.04.1 and have built from the latest
>>     source in master branch of https://gitlab.com/sane-project/backends.
>>
>>     The compilation is with debug and I get the following output
>>     pasted below.
>>
>>     The device is working since I am able to scan in an incredibly
>>     limited fashion using the official scangearmp2 (which I have since
>>     uninstalled). The device also works if I reboot to windows.
>>
>>     ----------------------------------------------
>>     giles at gklinux:~/github/backends$ SANE_DEBUG_PIXMA=21
>>     SANE_DEBUG_BJNP=3 simple-scan
>>
>>     (simple-scan:15264): Gtk-WARNING **: 17:10:07.715: Failed to
>>     register client:
>>     GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to
>>     register client
>>     [sanei_debug] Setting debug level of pixma to 21.
>>     [pixma] pixma is compiled with pthread support.
>>     [pixma] pixma version 0.17.49
>>     [sanei_debug] Setting debug level of bjnp to 3.
>>     [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.49
>>     [bjnp] Set new default timeout value: 5000 ms.[bjnp]
>>     sanei_bjnp_find_devices: Adding scanner from pixma.conf:
>>     bjnp://192.168.0.100:8612 <http://192.168.0.100:8612>
>>     [bjnp] bjnp_allocate_device(bjnp://192.168.0.100:8612/timeout=5000
>>     <http://192.168.0.100:8612/timeout=5000>) 0
>>     [bjnp] get_scanner_name: Name for 192.168.0.100 not found : Name
>>     or service not known
>>     [bjnp] setup_udp_socket: Setting up a UDP socket, dest:
>>     192.168.0.100  port 8612
>>     [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - no data received (timeout = 5000)
>>     [bjnp] bjnp_init_device_structure: Cannot read mac address,
>>     skipping this scanner
>>     [bjnp] bjnp_allocate_device: Scanner not yet in our list, added
>>     it: 192.168.0.100:8612 <http://192.168.0.100:8612>
>>     [bjnp] setup_udp_socket: Setting up a UDP socket, dest:
>>     192.168.0.100  port 8612
>>     [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - recv failed: Connection refused[bjnp]
>>     udp_command: ERROR - no data received (timeout = 5000)
>>     [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
>>     [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>>     bjnp://192.168.0.100:8612/timeout=5000
>>     <http://192.168.0.100:8612/timeout=5000>
>>     [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now
>>     do auto detection...
>>     [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
>>     [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast,
>>     socket = 50
>>     [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
>>     [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast,
>>     socket = 51
>>     [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast,
>>     socket = 52
>>     [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast,
>>     socket = 53
>>     [bjnp] sanei_find_devices: scanner discovery finished...
>>     [pixma] pixma_find_scanners() found 0 devices
>>
>