[sane-devel] Canon MG3050

[kamp000x at arcor.de]

So sorry, these are the correct versions:

[code]

ii  libsane-common                               
1.0.27-1~experimental3ubuntu2.1              all          API library
for scanners -- documentation and support files
ii  libsane-hpaio:amd64                          
3.17.10+repack0-5                            amd64        HP SANE
backend for multi-function peripherals
ii  libsane1:amd64                               
1.0.27-1~experimental3ubuntu2.1              amd64        API library
for scanners
ii  sane-utils                                   
1.0.27-1~experimental3ubuntu2.1              amd64        API library
for scanners -- utilities
ii  xsane                                        
0.999-5ubuntu2                               amd64        featureful
graphical frontend for SANE (Scanner Access Now Easy)
ii  xsane-common                                 
0.999-5ubuntu2                               all          xsane
architecture independent files
[/code]


USB is working, wifi not.

I updated with your repo to version 1.0.28+git20190802, same problem here.

[bjnp] add_scanner: ERROR - Cannot read scanner make & model:
bjnp://192.168.***.**:8612/timeout=10000

Regards,

Kamp

On 03.08.19 19:18, Rolf Bensch wrote:
> Hi Kamp,
>
> No wonder, your SANE installation is outdated and doesn't support
> MG3050. SANE version must be >= 1.0.27. Please update SANE e.g. from my
> PPA: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git .
>
> Due to your scanner is in 'untested' status, please try to scan via USB
> first. If this is working, then you can switch to WiFi.
>
> Debug hints and BJNP setup are described in the man page '$ man sane-pixma'
>
> Hope this helps.
>
> Cheers,
> Rolf
>
>
> Am 03.08.19 um 11:38 schrieb kamp000x at arcor.de:
>> Thanks.
>>
>> This Scanner is working over usb, but not over wifi.
>>
>> Can I scan over network with is printer?
>>
>> This device is connected to my wifi network and I can print.
>>
>> The IP address is located in the file "/etc/sane.d/pixma.conf"
>> # Canon MG3050
>> bjnp://192.168.***.**
>>
>> Output scanimage:
>>
>> [CODE]
>>
>> scanimage -L
>> [bjnp] udp_command: ERROR - no data received
>> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping
>> this scanner
>> [bjnp] udp_command: ERROR - no data received
>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>> bjnp://192.168.***.**
>>
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>>
>> [/CODE]
>>
>>
>> [CODE]
>>
>> ii  libsane:amd64                                
>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>> scanners
>> ii  libsane-common                               
>> 1.0.25+git20150528-1ubuntu2.16.04.1        all          API library for
>> scanners -- documentation and support files
>> ii  sane-utils                                   
>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>> scanners -- utilities
>> ii  xsane                                        
>> 0.999-3ubuntu1                             amd64        featureful
>> graphical frontend for SANE (Scanner Access Now Easy)
>> ii  xsane-common                                 
>> 0.999-3ubuntu1                             all          xsane
>> architecture independent files
>> [/CODE]
>>
>> Ubuntu Version: 18.04 LTS
>>
>> I tested ubuntu 19.04, with the same result.
>>
>>
>> Regards
>>
>> Kamp
>>
>> On 04.02.18 12:58, Rolf Bensch wrote:
>>> Hi,
>>>
>>> Your scanner should work. Please try the scanner connected via USB and
>>> report your results.
>>>
>>> Hope this helps.
>>>
>>> Cheers,
>>> Rolf
>>>
>>>
>>> Am 29.01.2018 um 16:23 schrieb kamp000x at arcor.de:
>>>> Hi,
>>>>
>>>>
>>>> can I check if the MG3050 is still supported without inserting cartridges?
>>>>
>>>> I need a sane supported scanner, otherwise I still can return the device.
>>>>
>>>>
>>>> http://www.sane-project.org/sane-mfgs.html
>>>>
>>>> Current sane status:
>>>>
>>>> PIXMA MG3000 Series     USB WiFi     0x04a9/0x180b     Untested    
>>>> Testers needed!
>>>>
>>>>
>>>> Thanks.
>>>>
>>>> Regards,
>>>> Kamp
>>>>
>>>>
>>>>