[sane-devel] Canon MG3050

[Rolf Bensch]

Hi Kamp,

Please try to scan via USB with disabled WiFi. If this isn't working,
please provide the created log file:
$ SANE_DEBUG_PIXMA=11 scanimage 2> pixma.log > pixma.pnm

Hope this helps.

Cheers,
Rolf


Am 03.08.19 um 21:31 schrieb kamp000x at arcor.de:
> So sorry, these are the correct versions:
> 
> [code]
> 
> ii  libsane-common                               
> 1.0.27-1~experimental3ubuntu2.1              all          API library
> for scanners -- documentation and support files
> ii  libsane-hpaio:amd64                          
> 3.17.10+repack0-5                            amd64        HP SANE
> backend for multi-function peripherals
> ii  libsane1:amd64                               
> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
> for scanners
> ii  sane-utils                                   
> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
> for scanners -- utilities
> ii  xsane                                        
> 0.999-5ubuntu2                               amd64        featureful
> graphical frontend for SANE (Scanner Access Now Easy)
> ii  xsane-common                                 
> 0.999-5ubuntu2                               all          xsane
> architecture independent files
> [/code]
> 
> 
> USB is working, wifi not.
> 
> I updated with your repo to version 1.0.28+git20190802, same problem here.
> 
> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
> bjnp://192.168.***.**:8612/timeout=10000
> 
> Regards,
> 
> Kamp
> 
> On 03.08.19 19:18, Rolf Bensch wrote:
>> Hi Kamp,
>>
>> No wonder, your SANE installation is outdated and doesn't support
>> MG3050. SANE version must be >= 1.0.27. Please update SANE e.g. from my
>> PPA: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git .
>>
>> Due to your scanner is in 'untested' status, please try to scan via USB
>> first. If this is working, then you can switch to WiFi.
>>
>> Debug hints and BJNP setup are described in the man page '$ man sane-pixma'
>>
>> Hope this helps.
>>
>> Cheers,
>> Rolf
>>
>>
>> Am 03.08.19 um 11:38 schrieb kamp000x at arcor.de:
>>> Thanks.
>>>
>>> This Scanner is working over usb, but not over wifi.
>>>
>>> Can I scan over network with is printer?
>>>
>>> This device is connected to my wifi network and I can print.
>>>
>>> The IP address is located in the file "/etc/sane.d/pixma.conf"
>>> # Canon MG3050
>>> bjnp://192.168.***.**
>>>
>>> Output scanimage:
>>>
>>> [CODE]
>>>
>>> scanimage -L
>>> [bjnp] udp_command: ERROR - no data received
>>> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping
>>> this scanner
>>> [bjnp] udp_command: ERROR - no data received
>>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>>> bjnp://192.168.***.**
>>>
>>> No scanners were identified. If you were expecting something different,
>>> check that the scanner is plugged in, turned on and detected by the
>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>> which came with this software (README, FAQ, manpages).
>>>
>>> [/CODE]
>>>
>>>
>>> [CODE]
>>>
>>> ii  libsane:amd64                                
>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>> scanners
>>> ii  libsane-common                               
>>> 1.0.25+git20150528-1ubuntu2.16.04.1        all          API library for
>>> scanners -- documentation and support files
>>> ii  sane-utils                                   
>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>> scanners -- utilities
>>> ii  xsane                                        
>>> 0.999-3ubuntu1                             amd64        featureful
>>> graphical frontend for SANE (Scanner Access Now Easy)
>>> ii  xsane-common                                 
>>> 0.999-3ubuntu1                             all          xsane
>>> architecture independent files
>>> [/CODE]
>>>
>>> Ubuntu Version: 18.04 LTS
>>>
>>> I tested ubuntu 19.04, with the same result.
>>>
>>>
>>> Regards
>>>
>>> Kamp
>>>
>>> On 04.02.18 12:58, Rolf Bensch wrote:
>>>> Hi,
>>>>
>>>> Your scanner should work. Please try the scanner connected via USB and
>>>> report your results.
>>>>
>>>> Hope this helps.
>>>>
>>>> Cheers,
>>>> Rolf
>>>>
>>>>
>>>> Am 29.01.2018 um 16:23 schrieb kamp000x at arcor.de:
>>>>> Hi,
>>>>>
>>>>>
>>>>> can I check if the MG3050 is still supported without inserting cartridges?
>>>>>
>>>>> I need a sane supported scanner, otherwise I still can return the device.
>>>>>
>>>>>
>>>>> http://www.sane-project.org/sane-mfgs.html
>>>>>
>>>>> Current sane status:
>>>>>
>>>>> PIXMA MG3000 Series     USB WiFi     0x04a9/0x180b     Untested    
>>>>> Testers needed!
>>>>>
>>>>>
>>>>> Thanks.
>>>>>
>>>>> Regards,
>>>>> Kamp
>>>>>
>>>>>
>>>>>
>