[sane-devel] Canon MG3050

[Rolf Bensch]

Hi Louis,

Please help with the BJNP issue.

Many thanks.

Cheers,
Rolf


Am 04.08.19 um 12:05 schrieb kamp000x at arcor.de:
> Thanks, as mentioned before, scanning over usb is working.
> 
> But scanning over wifi is not working, it ends up with this error message.
> 
> Would be nice, if this would work, on the sane page it is sill listed
> with "Testers needed". I could provide some test logs if required.
> 
> Here are both logs, with usb and wifi only:
> 
> https://pastebin.com/VP4nRYUb
> 
> 
> Cheers,
> 
> Kamp
> 
> 
> On 04.08.19 11:28, Rolf Bensch wrote:
>> Hi Kamp,
>>
>> Please try to scan via USB with disabled WiFi. If this isn't working,
>> please provide the created log file:
>> $ SANE_DEBUG_PIXMA=11 scanimage 2> pixma.log > pixma.pnm
>>
>> Hope this helps.
>>
>> Cheers,
>> Rolf
>>
>>
>> Am 03.08.19 um 21:31 schrieb kamp000x at arcor.de:
>>> So sorry, these are the correct versions:
>>>
>>> [code]
>>>
>>> ii  libsane-common                               
>>> 1.0.27-1~experimental3ubuntu2.1              all          API library
>>> for scanners -- documentation and support files
>>> ii  libsane-hpaio:amd64                          
>>> 3.17.10+repack0-5                            amd64        HP SANE
>>> backend for multi-function peripherals
>>> ii  libsane1:amd64                               
>>> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
>>> for scanners
>>> ii  sane-utils                                   
>>> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
>>> for scanners -- utilities
>>> ii  xsane                                        
>>> 0.999-5ubuntu2                               amd64        featureful
>>> graphical frontend for SANE (Scanner Access Now Easy)
>>> ii  xsane-common                                 
>>> 0.999-5ubuntu2                               all          xsane
>>> architecture independent files
>>> [/code]
>>>
>>>
>>> USB is working, wifi not.
>>>
>>> I updated with your repo to version 1.0.28+git20190802, same problem here.
>>>
>>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>>> bjnp://192.168.***.**:8612/timeout=10000
>>>
>>> Regards,
>>>
>>> Kamp
>>>
>>> On 03.08.19 19:18, Rolf Bensch wrote:
>>>> Hi Kamp,
>>>>
>>>> No wonder, your SANE installation is outdated and doesn't support
>>>> MG3050. SANE version must be >= 1.0.27. Please update SANE e.g. from my
>>>> PPA: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git .
>>>>
>>>> Due to your scanner is in 'untested' status, please try to scan via USB
>>>> first. If this is working, then you can switch to WiFi.
>>>>
>>>> Debug hints and BJNP setup are described in the man page '$ man sane-pixma'
>>>>
>>>> Hope this helps.
>>>>
>>>> Cheers,
>>>> Rolf
>>>>
>>>>
>>>> Am 03.08.19 um 11:38 schrieb kamp000x at arcor.de:
>>>>> Thanks.
>>>>>
>>>>> This Scanner is working over usb, but not over wifi.
>>>>>
>>>>> Can I scan over network with is printer?
>>>>>
>>>>> This device is connected to my wifi network and I can print.
>>>>>
>>>>> The IP address is located in the file "/etc/sane.d/pixma.conf"
>>>>> # Canon MG3050
>>>>> bjnp://192.168.***.**
>>>>>
>>>>> Output scanimage:
>>>>>
>>>>> [CODE]
>>>>>
>>>>> scanimage -L
>>>>> [bjnp] udp_command: ERROR - no data received
>>>>> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping
>>>>> this scanner
>>>>> [bjnp] udp_command: ERROR - no data received
>>>>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>>>>> bjnp://192.168.***.**
>>>>>
>>>>> No scanners were identified. If you were expecting something different,
>>>>> check that the scanner is plugged in, turned on and detected by the
>>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>>> which came with this software (README, FAQ, manpages).
>>>>>
>>>>> [/CODE]
>>>>>
>>>>>
>>>>> [CODE]
>>>>>
>>>>> ii  libsane:amd64                                
>>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>>>> scanners
>>>>> ii  libsane-common                               
>>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        all          API library for
>>>>> scanners -- documentation and support files
>>>>> ii  sane-utils                                   
>>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>>>> scanners -- utilities
>>>>> ii  xsane                                        
>>>>> 0.999-3ubuntu1                             amd64        featureful
>>>>> graphical frontend for SANE (Scanner Access Now Easy)
>>>>> ii  xsane-common                                 
>>>>> 0.999-3ubuntu1                             all          xsane
>>>>> architecture independent files
>>>>> [/CODE]
>>>>>
>>>>> Ubuntu Version: 18.04 LTS
>>>>>
>>>>> I tested ubuntu 19.04, with the same result.
>>>>>
>>>>>
>>>>> Regards
>>>>>
>>>>> Kamp
>>>>>
>>>>> On 04.02.18 12:58, Rolf Bensch wrote:
>>>>>> Hi,
>>>>>>
>>>>>> Your scanner should work. Please try the scanner connected via USB and
>>>>>> report your results.
>>>>>>
>>>>>> Hope this helps.
>>>>>>
>>>>>> Cheers,
>>>>>> Rolf
>>>>>>
>>>>>>
>>>>>> Am 29.01.2018 um 16:23 schrieb kamp000x at arcor.de:
>>>>>>> Hi,
>>>>>>>
>>>>>>>
>>>>>>> can I check if the MG3050 is still supported without inserting cartridges?
>>>>>>>
>>>>>>> I need a sane supported scanner, otherwise I still can return the device.
>>>>>>>
>>>>>>>
>>>>>>> http://www.sane-project.org/sane-mfgs.html
>>>>>>>
>>>>>>> Current sane status:
>>>>>>>
>>>>>>> PIXMA MG3000 Series     USB WiFi     0x04a9/0x180b     Untested    
>>>>>>> Testers needed!
>>>>>>>
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Kamp
>>>>>>>
>>>>>>>
>>>>>>>
>