[sane-devel] Canon MB5050 and ADF

[Rolf Bensch]

Hi Louis,

I just committed your suggested fixes for your MB5050 and other MB scanners.

Do you already have some test results from your new MB5450? What's about
scanning with 1200 dpi? I'll update MB5100 settings when your new
scanner is working, due to near USB PID.

Hope this helps.

Cheers,
Rolf


Am 10.08.19 um 19:29 schrieb Louis Lagendijk:
> hi
> I have had a Canon Maxify MX5050 for a few years. I use scanning very
> seldom (so why did I get involved in the Sane project?)
> I  recently had a few cases where I needed to scan a number of pages. I
> failed to get ADF working. Today I spent a few hours on making it work.
> 
> I see that you defined PIXMA_CAP_ADFDUP for the MB5000. My MB5050
> however has a single sided ADF. Do you know of other MB5000 type
> scanners that have duplex ADF or should this be PIXMA_CAP_ADF?
> 
> The very similar MB5150 has indeed a duplex ADF.
> 
> And second: the MB5050 seems to require PIXMA_CAP_ADF_JPEG. Is it ok to
> add it? 
> 
> With these changes, resulting in:
> 
> DEVICE ("Canon MAXIFY MB5000 Series", "MB5000", MB5000_PID, 1200, 0, 0,
> 638, 1050, PIXMA_CAP_CIS | PIXMA_CAP_ADF | PIXMA_CAP_ADF_JPEG),
> 
> my scanner works with ADF.
> 
> As the MB5100 series seems to be mostly identical, I would guess that
> this will also need PIXMA_CAP_ADF_JPEG.
> 
> Can you please check and update GIT or let me know it I should do so?
> 
> By Monday I will receive an MB5450. The printhead in the MB5050 is
> clogged, so I ordered a new Maxify. Will test that one as well when I
> get some time....
> 
> Thanks as usual for your support
> 
> Kind regards, Louis
> 
> 
> 
> 
> 
>