[sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

[Ulf Zibis]

Am 21.11.19 um 18:35 schrieb thierry at ordissimo.com:
> the deposit no longer exists!
> Used a safe repo!
> sudo add-apt-repository ppa:rolfbensch/sane-git
> sudo apt-get update
>
> # sudo apt update
> # apt-get install sane-utils
> restart
> # scanimage -L

Done!

After restart:

jannis at MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis at MS-7616:~$ lsusb
Bus 002 Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030
Bus 001 Device 003: ID 04f2:0719 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub