[sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

[Ulf Zibis]

Hi Thierry (and others),

have you missed my last message?

Do you have any other advices, what I can try additionally?

-Ulf

Am 21.11.19 um 19:17 schrieb Ulf Zibis:
> Am 21.11.19 um 18:35 schrieb thierry at ordissimo.com:
>> the deposit no longer exists!
>> Used a safe repo!
>> sudo add-apt-repository ppa:rolfbensch/sane-git
>> sudo apt-get update
>>
>> # sudo apt update
>> # apt-get install sane-utils
>> restart
>> # scanimage -L
> Done!
>
> After restart:
>
> jannis at MS-7616:~$ sudo scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> jannis at MS-7616:~$ lsusb
> Bus 002 Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
> Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia Card Reader
> Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030    <<<====*
> Bus 001 Device 003: ID 04f2:0719 Chicony Electronics Co., Ltd
> Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> So the scanner is still not recognized by SANE.