[sane-devel] Getting a Canon TS9120 scanner to be recognized
Anton Khabbaz
anton.khabbaz at gmail.com
Wed Apr 29 19:09:21 BST 2020
Thank you for your help Thierry and Alexander and the others. I am
definitely getting a response from the scanner on my network. Below are
the steps that I took, following all your suggestions. Airscan-discover
and ahavi both find the printer. I think we are close. but scanimage -L
still does not work though. Below are my detailed steps. The ahavi
command lists alot of ports that are used and I have been only opening up a
few, like 80 tcp, 443 tcp, and 8612 udp for sending/recieving, Do I need
to modify the firewall for all the ports that ahavi lists?. This computer
is a dual boot and although I am in ubuntu linux, the scanner recognizes
the Windows computer with the same IP address (when it is on). I thought I
would mention that too.
Thank you again for all your suggestions,
Anton Khabbaz
I tried your recommendations and here is what I did.
1.
I modified the output forwarding rules to allow traffic from and to my
ubuntu computer (192.168.1.25) to the Canon TS9120 printer (192.168.1.16)
, port 80 tcp
The output of ufw status is listed (other rules and ports like udp 8612 are
omitted for clarity)
To Action From
-- ------ ----
192.168.1.25 ALLOW 192.168.1.16 80/tcp
192.168.1.25 80/tcp ALLOW 192.168.1.16 80/tcp
192.168.1.16 80/tcp ALLOW OUT 192.168.1.25 80/tcp `
2. Installed GO and air-scan discover (just as easy as you said,
Alexander). ./airscan-discover finds the printer and it is eSCL, just as
Thierry said.
[devices]
"Canon TS9100 series" = http://192.168.1.16:80/eSCL
For this reason I allowed access via tcp port 80 from host ubuntu to Canon
printer and vice-versa.
3 changed config files
/etc/sane.d/pixma.conf
removed my additions; now has
only comments:
# bjnp://printer-1.pheasant.org // will use the 5000 ms timeout
# bjnp://scanner.bad-network.org/timeout=1500 // timeout set to 1500 ms
# bjnp-timeout=3000 // will be used for auto-detected scanners
#
# Example using for a scanner using mfnp including the optional timeout:
# mfnp://scanner.bad-network.org/timeout=1500
followed Thierry's instructions in /etc/sane.d/escl.conf.
Uncommented lines and filled in the printer address
#device http://123.456.789.10:8080 OptionalModel1
#device https://123.456.789.10:443 "Optional Model 2"
#device unix:/run/proxy.sock:http://123.456.789.10:80
[device]
model Canon TS9120
type https
ip 192.168.1.16
port 80
#device http://192.168.1.16:80 "Canon TS9120"
renamed /etc/sane.d/pixma.conf.dpkg_old to
/etc/sane.d/pixma_old.config.dpkg_old
3. Ran scanimage -L
Here is the output:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
4. Ahavi rt also found lots of ports and info about the scanner:
avahi-browse -rt -a
+ eno1 IPv6 Canon TS9100 series Internet
Printer local
+ eno1 IPv4 Canon TS9100 series Internet
Printer local
+ eno1 IPv6 Canon TS9100 series Secure Internet
Printer local
+ eno1 IPv4 Canon TS9100 series Secure Internet
Printer local
= eno1 IPv6 Canon TS9100 series Internet
Printer local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [631]
txt = ["mopria-certified=1.3" "print_wfds=T" "PaperMax=legal-A4"
"kind=document,envelope,photo,disc,postcard" "Fax=F" "Scan=T" "Duplex=T"
"Color=T" "UUID=00000000-0000-1000-8000-00182011024b"
"URF=V1.4,CP1,PQ4-5,RS600,SRGB24,W8,OB9,OFU0,DM3,IS1-18" "usb_CMD=URF"
"usb_MDL=TS9100 series" "usb_MFG=Canon" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=application/octet-stream,image/jpeg,image/urf,image/pwg-raster"
"product=(Canon TS9100 series)" "ty=Canon TS9100 series" "priority=15"
"qtotal=1" "rp=ipp/print" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series Internet
Printer local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [631]
txt = ["mopria-certified=1.3" "print_wfds=T" "PaperMax=legal-A4"
"kind=document,envelope,photo,disc,postcard" "Fax=F" "Scan=T" "Duplex=T"
"Color=T" "UUID=00000000-0000-1000-8000-00182011024b"
"URF=V1.4,CP1,PQ4-5,RS600,SRGB24,W8,OB9,OFU0,DM3,IS1-18" "usb_CMD=URF"
"usb_MDL=TS9100 series" "usb_MFG=Canon" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=application/octet-stream,image/jpeg,image/urf,image/pwg-raster"
"product=(Canon TS9100 series)" "ty=Canon TS9100 series" "priority=15"
"qtotal=1" "rp=ipp/print" "txtvers=1"]
= eno1 IPv6 Canon TS9100 series Secure Internet
Printer local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [631]
txt = ["TLS=1.2" "mopria-certified=1.3" "print_wfds=T"
"PaperMax=legal-A4" "kind=document,envelope,photo,disc,postcard" "Fax=F"
"Scan=T" "Duplex=T" "Color=T" "UUID=00000000-0000-1000-8000-00182011024b"
"URF=V1.4,CP1,PQ4-5,RS600,SRGB24,W8,OB9,OFU0,DM3,IS1-18" "usb_CMD=URF"
"usb_MDL=TS9100 series" "usb_MFG=Canon" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=application/octet-stream,image/jpeg,image/urf,image/pwg-raster"
"product=(Canon TS9100 series)" "ty=Canon TS9100 series" "priority=15"
"qtotal=1" "rp=ipp/print" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series Secure Internet
Printer local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [631]
txt = ["TLS=1.2" "mopria-certified=1.3" "print_wfds=T"
"PaperMax=legal-A4" "kind=document,envelope,photo,disc,postcard" "Fax=F"
"Scan=T" "Duplex=T" "Color=T" "UUID=00000000-0000-1000-8000-00182011024b"
"URF=V1.4,CP1,PQ4-5,RS600,SRGB24,W8,OB9,OFU0,DM3,IS1-18" "usb_CMD=URF"
"usb_MDL=TS9100 series" "usb_MFG=Canon" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=application/octet-stream,image/jpeg,image/urf,image/pwg-raster"
"product=(Canon TS9100 series)" "ty=Canon TS9100 series" "priority=15"
"qtotal=1" "rp=ipp/print" "txtvers=1"]
+ eno1 IPv6 DS1813 Web Site
local
+ eno1 IPv4 DS1813 Web Site
local
= eno1 IPv6 DS1813 Web Site
local
hostname = [DS1813.local]
address = [fe80::211:32ff:fe1d:e2f3]
port = [5000]
txt =
["mac_address=00:11:32:1d:e2:f3|00:11:32:1d:e2:f4|00:11:32:1d:e2:f5|00:11:32:1d:e2:f6"
"secure_admin_port=5001" "admin_port=5000" "version_build=24922"
"version_minor=2" "version_major=6" "serial=13C0LON002158" "model=DS1813+"
"vendor=Synology"]
= eno1 IPv4 DS1813 Web Site
local
hostname = [DS1813.local]
address = [192.168.1.8]
port = [5000]
txt =
["mac_address=00:11:32:1d:e2:f3|00:11:32:1d:e2:f4|00:11:32:1d:e2:f5|00:11:32:1d:e2:f6"
"secure_admin_port=5001" "admin_port=5000" "version_build=24922"
"version_minor=2" "version_major=6" "serial=13C0LON002158" "model=DS1813+"
"vendor=Synology"]
+ eno1 IPv4 Canon TS9100 series Web Site
local
+ eno1 IPv4 Canon TS9100 series _uscan._tcp
local
+ eno1 IPv4 Canon TS9100 series _uscans._tcp
local
+ eno1 IPv4 Canon TS9100 series
_canon-chmp._tcp local
+ eno1 IPv4 Canon TS9100 series UNIX Printer
local
+ eno1 IPv4 Canon TS9100 series PDL Printer
local
+ eno1 IPv4 Canon TS9100 series _privet._tcp
local
+ eno1 IPv6 Canon TS9100 series Web Site
local
+ eno1 IPv6 Canon TS9100 series _uscan._tcp
local
+ eno1 IPv6 Canon TS9100 series _uscans._tcp
local
+ eno1 IPv6 Canon TS9100 series
_canon-chmp._tcp local
+ eno1 IPv6 Canon TS9100 series UNIX Printer
local
+ eno1 IPv6 Canon TS9100 series PDL Printer
local
+ eno1 IPv6 Canon TS9100 series _privet._tcp
local
+ eno1 IPv4 7073435effee6a3f41ed38065ea9ae81 _cros_p2p._tcp
local
= eno1 IPv4 7073435effee6a3f41ed38065ea9ae81 _cros_p2p._tcp
local
hostname = [7073435effee6a3f41ed38065ea9ae81.local]
address = [192.168.1.27]
port = [16725]
txt =
["id_cros_update_size_126964004_hash_ZDkxeXQ2RjhJT1NJYytyL0pFTkJVOUhya0pXQUZPclVpNEE2am5mVkNIZz0=.cros_au=126964004"
"num_connections=0"]
+ eno1 IPv4 cceebffcab69823d88103da85ea9b84c _cros_p2p._tcp
local
= eno1 IPv4 cceebffcab69823d88103da85ea9b84c _cros_p2p._tcp
local
hostname = [cceebffcab69823d88103da85ea9b84c.local]
address = [192.168.1.23]
port = [16725]
txt = ["num_connections=0"]
+ eno1 IPv6 DS1813
_device-info._tcp local
+ eno1 IPv6 DS1813 Microsoft
Windows Network local
+ eno1 IPv6 DS1813 Apple File
Sharing local
+ eno1 IPv4 DS1813
_device-info._tcp local
+ eno1 IPv4 DS1813 Microsoft
Windows Network local
+ eno1 IPv4 DS1813 Apple File
Sharing local
= eno1 IPv6 DS1813
_device-info._tcp local
hostname = [DS1813.local]
address = [fe80::211:32ff:fe1d:e2f3]
port = [0]
txt = ["model=Xserve"]
= eno1 IPv6 DS1813 Microsoft
Windows Network local
hostname = [DS1813.local]
address = [fe80::211:32ff:fe1d:e2f3]
port = [445]
txt = []
= eno1 IPv6 DS1813 Apple File
Sharing local
hostname = [DS1813.local]
address = [fe80::211:32ff:fe1d:e2f3]
port = [548]
txt = []
= eno1 IPv4 DS1813
_device-info._tcp local
hostname = [DS1813.local]
address = [192.168.1.8]
port = [0]
txt = ["model=Xserve"]
= eno1 IPv4 DS1813 Microsoft
Windows Network local
hostname = [DS1813.local]
address = [192.168.1.8]
port = [445]
txt = []
= eno1 IPv4 DS1813 Apple File
Sharing local
hostname = [DS1813.local]
address = [192.168.1.8]
port = [548]
txt = []
= eno1 IPv4 Canon TS9100 series Web Site
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["txtvers=1"]
= eno1 IPv4 Canon TS9100 series _uscan._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["duplex=F" "is=platen" "cs=grayscale,color" "rs=eSCL"
"representation=http://00000099933C.local./icon/printer_icon.png"
"vers=2.63" "UUID=00000000-0000-1000-8000-00182011024b" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=image/jpeg,application/pdf" "ty=Canon TS9100 series" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series _uscans._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [443]
txt = ["duplex=F" "is=platen" "cs=grayscale,color" "rs=eSCL"
"representation=http://00000099933C.local./icon/printer_icon.png"
"vers=2.63" "UUID=00000000-0000-1000-8000-00182011024b" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=image/jpeg,application/pdf" "ty=Canon TS9100 series" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series
_canon-chmp._tcp local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["mpath=http://00000099933C.local./canon/ij/command1/port1"
"txtvers=1"]
= eno1 IPv4 Canon TS9100 series UNIX Printer
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [515]
txt = ["Fax=F" "Scan=T" "Duplex=T" "Color=T"
"UUID=00000000-0000-1000-8000-00182011024b" "usb_MDL=TS9100 series"
"usb_MFG=Canon" "adminurl=http://00000099933C.local." "note="
"pdl=application/octet-stream" "product=(Canon TS9100 series)" "ty=Canon
TS9100 series" "priority=60" "qtotal=1" "rp=auto" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series PDL Printer
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [9100]
txt = ["Fax=F" "Scan=T" "Duplex=T" "Color=T"
"UUID=00000000-0000-1000-8000-00182011024b" "usb_MDL=TS9100 series"
"usb_MFG=Canon" "adminurl=http://00000099933C.local." "note="
"pdl=application/octet-stream" "product=(Canon TS9100 series)" "ty=Canon
TS9100 series" "priority=30" "qtotal=1" "rp=auto" "txtvers=1"]
= eno1 IPv4 Canon TS9100 series _privet._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["cs=online" "id=" "type=printer" "url=
https://www.google.com/cloudprint" "note=" "ty=Canon TS9100 series"
"txtvers=1"]
= eno1 IPv6 Canon TS9100 series Web Site
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["txtvers=1"]
= eno1 IPv6 Canon TS9100 series _uscan._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["duplex=F" "is=platen" "cs=grayscale,color" "rs=eSCL"
"representation=http://00000099933C.local./icon/printer_icon.png"
"vers=2.63" "UUID=00000000-0000-1000-8000-00182011024b" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=image/jpeg,application/pdf" "ty=Canon TS9100 series" "txtvers=1"]
= eno1 IPv6 Canon TS9100 series _uscans._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [443]
txt = ["duplex=F" "is=platen" "cs=grayscale,color" "rs=eSCL"
"representation=http://00000099933C.local./icon/printer_icon.png"
"vers=2.63" "UUID=00000000-0000-1000-8000-00182011024b" "adminurl=
http://00000099933C.local./index.html?page=PAGE_AAP" "note="
"pdl=image/jpeg,application/pdf" "ty=Canon TS9100 series" "txtvers=1"]
= eno1 IPv6 Canon TS9100 series
_canon-chmp._tcp local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["mpath=http://00000099933C.local./canon/ij/command1/port1"
"txtvers=1"]
= eno1 IPv6 Canon TS9100 series UNIX Printer
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [515]
txt = ["Fax=F" "Scan=T" "Duplex=T" "Color=T"
"UUID=00000000-0000-1000-8000-00182011024b" "usb_MDL=TS9100 series"
"usb_MFG=Canon" "adminurl=http://00000099933C.local." "note="
"pdl=application/octet-stream" "product=(Canon TS9100 series)" "ty=Canon
TS9100 series" "priority=60" "qtotal=1" "rp=auto" "txtvers=1"]
= eno1 IPv6 Canon TS9100 series PDL Printer
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [9100]
txt = ["Fax=F" "Scan=T" "Duplex=T" "Color=T"
"UUID=00000000-0000-1000-8000-00182011024b" "usb_MDL=TS9100 series"
"usb_MFG=Canon" "adminurl=http://00000099933C.local." "note="
"pdl=application/octet-stream" "product=(Canon TS9100 series)" "ty=Canon
TS9100 series" "priority=30" "qtotal=1" "rp=auto" "txtvers=1"]
= eno1 IPv6 Canon TS9100 series _privet._tcp
local
hostname = [00000099933C.local]
address = [192.168.1.16]
port = [80]
txt = ["cs=online" "id=" "type=printer" "url=
https://www.google.com/cloudprint" "note=" "ty=Canon TS9100 series"
"txtvers=1"]
On Tue, Apr 28, 2020 at 4:23 PM Thierry HUCAHRD <thierry at ordissimo.com>
wrote:
> Le 2020-04-28 21:36, Anton Khabbaz a écrit :
> > Thank you all for your helpful feedback. Still no luck but your
> > suggestions led me to try the following.
> >
> > 1 I installed ajour sane the commands that Theirry Hucahrd listed.
> > The update went through, but I see no new packages in my package
> > manager. (I assume this is like an upgrade to sane?)
> >
> > 2. I installed airscan, following the airscan instructions for my
> > operating system:
> Hi,
>
> For your information, your device uses
> 1. the PIXMA backend for USB
> 2. the ESCL backend for the network
>
> add the line below in this file /etc/sane.d/escl.conf
> device https://192.168.1.16:443 "Canon TS9120"
> then run this command
> scanimage -L
>
> Thierry
> >
> > sudo sh -c "echo 'deb
> > http://download.opensuse.org/repositories/home:/pzz/xUbuntu_18.04/ /'
> >> /etc/apt/sources.list.d/home:pzz.list"
> > wget -nv
> >
> https://download.opensuse.org/repositories/home:pzz/xUbuntu_18.04/Release.key
> > -O Release.key
> > sudo apt-key add - < Release.key
> > sudo apt-get update
> > sudo apt-get install sane-airscan
> >
> > In my synaptic package manager searching under sane I see these are
> > installed:
> >
> > sane-airscan 0.9.18+55.1
> >
> > xsane 0.999-5ubuntu2
> >
> > xsane-common
> >
> > sane 1.0.14-12 build 1
> >
> > sane-utils 1.0.29
> >
> > I didn't yet run the printer protocol detector, because I have yet to
> > install a GO compiler.
> >
> > Now when I run scanimage --list-devices I get a pause. That did not
> > happen before. I think that is airscan. Then this error message:
> >
> > [15:33:32.923780] [bjnp] udp_command: ERROR - no data received
> > (timeout = 2000)
> > [15:33:32.923885] [bjnp] bjnp_init_device_structure: Cannot read mac
> > address, skipping this scanner
> > [15:33:32.927092] [bjnp] bjnp_allocate_device: ERROR - Cannot resolve
> > host: fe80 port 8612
> >
> > No scanners were identified. If you were expecting something
> > different,
> > check that the scanner is plugged in, turned on and detected by the
> > sane-find-scanner tool (if appropriate). Please read the documentation
> > which came with this software (README, FAQ, manpages).
> >
> > I should say the printer is an all in one and it is connected through
> > a wired Tcp-ip cable (through a switch)
> >
> > Thank you again for your help,
> >
> > Anton Khabbaz
> >
> > cc: printer is a Canon TS9120 all in one.
> >
> > On Fri, Apr 24, 2020 at 4:40 PM Anton Khabbaz
> > <anton.khabbaz at gmail.com> wrote:
> >
> >> Hello,
> >>
> >> I would like to use my Canon TS9120 scanner but I am not able to
> >> find it through Sane. I believe I am doing all the right things.
> >> It is untested as a multifunction printer/scanner according to Sane
> >> backend documentation. I am running Ubuntu 18.04
> >>
> >> Here are my steps that I have taken so far.
> >>
> >> 1) I changed the firewall using ufw to allow communication via udp
> >> 8612. Following a faq at Canon:
> >> https://support.usa.canon.com/kb/index?page=content&id=ART109227.
> >>
> >> I added these rules:
> >> To Action From
> >> -- ------ ----
> >> 192.168.1.25 ALLOW 192.168.1.16 80/tcp
> >> 192.168.1.25 ALLOW 192.168.1.16 443/tcp
> >> 192.168.1.25 ALLOW 192.168.1.16
> >> 515,1900,5222,5357,8611,8612,9100/tcp
> >> 192.168.1.25 ALLOW 192.168.1.16
> >> 515,1900,5222,5357,8611,8612,9100/udp
> >> 192.168.1.25 ALLOW 192.168.1.16 137,138,139/udp
> >> 192.168.1.25 ALLOW 192.168.1.16 137,138,139/tcp
> >> 192.168.1.25 ALLOW 192.168.1.16 8610/udp
> >> Anywhere on eno1 ALLOW 192.168.1.16 8612/udp
> >> fe80::6767:4545:141b:9fc7 ALLOW fe80::9e32:ceff:fe99:933c
> >> 80/tcp
> >> fe80::6767:4545:141b:9fc7 ALLOW fe80::9e32:ceff:fe99:933c
> >> 443/tcp
> >> fe80::6767:4545:141b:9fc7 ALLOW fe80::9e32:ceff:fe99:933c
> >> 137,138,139,515,1900,5222,5357,8611,8612,9100/tcp
> >> fe80::6767:4545:141b:9fc7 ALLOW fe80::9e32:ceff:fe99:933c
> >> 137,138,139,515,1900,5222,5357,8611,8612,9100/udp
> >> fe80::6767:4545:141b:9fc7 ALLOW fe80::9e32:ceff:fe99:933c
> >> 8610/udp
> >> Anywhere (v6) on eno1 ALLOW fe80::9e32:ceff:fe99:933c
> >> 8612/udp
> >>
> >> 192.168.1.16 8612/udp ALLOW OUT Anywhere on eno1
> >> fe80::9e32:ceff:fe99:933c 8612/udp ALLOW OUT Anywhere (v6) on eno1
> >>
> >>
> >> my interface on ubuntu is eno1
> >>
> >> 2. I tried first Canon's linux driver. It installed and I ran
> >>
> >> sudo -i scangearmp2
> >> That took maybe 1 minute but never found the scanner.
> >>
> >> 3. Turning to Sane documentation
> >> https://gitlab.com/sane-project/backends/-/raw/master/INSTALL.linux
> >> I followed the steps. I got the backends from
> >> http://www.sane-project.org/snapshots/ and followed the readme.
> >> I think I ran ./configure BACKENDS="pixma".
> >> make
> >> make install.
> >> That seemed to build with no errors.
> >>
> >> 4. I checked and the latest backend seems to be installed
> >> sudo ldconfig -v | grep libsane
> >> /sbin/ldconfig.real: Can't stat /usr/local/lib/i386-linux-gnu: No
> >> such file or directory
> >> /sbin/ldconfig.real: Can't stat /usr/local/lib/i686-linux-gnu: No
> >> such file or directory
> >> /sbin/ldconfig.real: Can't stat /lib/i686-linux-gnu: No such file or
> >> directory
> >> /sbin/ldconfig.real: Can't stat /usr/lib/i686-linux-gnu: No such
> >> file or directory
> >> /sbin/ldconfig.real: Can't stat /usr/local/lib/x86_64-linux-gnu: No
> >> such file or directory
> >> /sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than
> >> once
> >> /sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more
> >> than once
> >> /sbin/ldconfig.real: /lib/i386-linux-gnu/ld-2.27.so [1] is the
> >> dynamic linker, ignoring
> >>
> >> libsane.so.1 -> libsane.so.1.0.29
> >> /sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.27.so [1] is the
> >> dynamic linker, ignoring
> >>
> >> 5. The udev rules step never worked:
> >> sudo cp tools/udev/libsane.rules /etc/udev/rules.d
> >> cp: cannot stat 'tools/udev/libsane.rules': No such file or
> >> directory
> >>
> >> 4. Modified the conf file as documented here
> >>
> >> http://www.sane-project.org/man/sane-pixma.5.html
> >>
> >> That file now has the address of the TS9120 printer
> >>
> >> bjnp://192.168.1.16:8612/timeout=2000 [2] // uses the default 1000ms
> >> timeout
> >> bjnp://fe80:0000:0000:0000:9e32:ceff:fe99:933c:8612/timeout=2000 //
> >> uses the default 1000ms timeout
> >>
> >> 5. The TS9120 works as a printer and even responds to ping with
> >> its ip4 address.
> >>
> >> 6. Tried scanimage -L. No luck finding this.
> >>
> >> scanimage -L
> >> [16:39:10.000767] [bjnp] udp_command: ERROR - no data received
> >> (timeout = 2000)
> >> [16:39:10.000879] [bjnp] bjnp_init_device_structure: Cannot read mac
> >> address, skipping this scanner
> >> [16:39:10.003823] [bjnp] bjnp_allocate_device: ERROR - Cannot
> >> resolve host: fe80 port 8612
> >>
> >> No scanners were identified. If you were expecting something
> >> different,
> >> check that the scanner is plugged in, turned on and detected by the
> >> sane-find-scanner tool (if appropriate). Please read the
> >> documentation
> >> which came with this software (README, FAQ, manpages).
> >>
> >> If you have any suggestions, I would certainly appreciate it.
> >>
> >> Thank you
> >
> >
> > Links:
> > ------
> > [1] http://ld-2.27.so
> > [2] http://192.168.1.16:8612/timeout=2000
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20200429/0d85a135/attachment-0001.html>
More information about the sane-devel
mailing list