[sane-devel] Plustek OpticFilm 7600i

[Torfinn Ingolfsen]

On Wed, Apr 29, 2020 at 8:36 PM Povilas Kanapickas <povilas at radix.lt> wrote:
>
>
> I've implemented support for Plustek OpticFilm 7600i scanner since
> 1.0.29 was released. You could try building the master branch, all
> features should work.
>
> Regards,
> Povilas

Thanks!
I've built master now, and scanimage says:
tingo at kg-core1$ frontend/scanimage -L
device `genesys:libusb:000:004' is a PLUSTEK OpticFilm 7600i (v1)
flatbed scanner

For completeness, sane-find-scanner output:
tingo at kg-core1$ ./tools/sane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.29-614-g9aad35503
[..]
<trying to find out which USB chip is used>
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GT-6801 ...
    this is not a GT-6801 (bcdUSB = 0x200)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GLxxx ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
<This USB chip looks like a GL842 (result from sane-backends
1.0.29-614-g9aad35503)>

found USB scanner (vendor=0x07b3 [Plustek INC], product=0x0c3b [Film
Scanner  ], chip=GL842) at libusb:000:004

So now I just need to install sane-backends, and find out which
program to use for scanning my photo negatives.
-- 
Regards,
Torfinn Ingolfsen