[sane-devel] Canon Pixma TS6150 not working - device is busy

Mike X echn-aton at outlook.de
Sun May 3 10:27:50 BST 2020


Hello together,


I subscribed because I have an issue with my Canon Pixma TS6150 on USB after upgrading to Ubuntu 20.04 LTS from Ubuntu 16.04 LTS.


As XSane and Simple Scan under Ubuntu 16.04 LTS did not work out, I loaded the driver from the Canon side. This latter worked out.


Now under Ubuntu 20.04 LTS it does not work out any longer. Thus, I tried with installing Sane and XSane. I installed all the drivers several times with a fresly installed Ubuntu (took some time :-)): At first the Canon driver without Sane/Xsane, then at first Sane/Xsane and then the Canon driver, however the error messages are nearly the same. I also changed the USB-ports.


The original Canon driver scangearmp2 delivers the error that a connection can‘t be established (translation from German language). When I installed it, it gave the error message that canberra-gtk-module was missing, however, the installation of this did not work out either.


The scanner is not explicitly mentioned in the list of supported deveices. However, the series 6100 is mentioned, thus, my guess was, that it is supported. The error message received from sane is: Device is busy


Any idea is appreciated. Thank you in advance.


Some more info:


Lsusb


recognizes the scanner: Bus 002 Device 003: ID 04a9:1822 Canon, Inc. TS6100 series


        sane-find-scanner

found USB scanner (vendor=0x04a9 [Canon], product=0x1822 [TS6100 series])       at libusb:002:003

        scanimage -L

device `pixma:04A91822' is a CANON Canon PIXMA TS6100 Series multi-function peripheral


        SANE_DEBUG_DLL=5 scanimage -L

[10:54:51.997138] [sanei_debug] Setting debug level of dll to 5.
[10:54:51.997300] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29
[10:54:51.997322] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[10:54:51.997367] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[10:54:51.997402] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[10:54:51.997443] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[10:54:51.997491] [dll] sane_init/read_config: reading dll.d/hplip
[10:54:51.997531] [dll] add_backend: adding backend `hpaio'
[10:54:51.997566] [dll] sane_init/read_dlld: done.
[10:54:51.997601] [dll] sane_init/read_config: reading dll.conf
[10:54:51.997636] [dll] add_backend: adding backend `net'
[10:54:51.997659] [dll] add_backend: adding backend `abaton'
[10:54:51.997839] [dll] add_backend: adding backend `bh'
[10:54:51.997860] [dll] add_backend: adding backend `canon'
[10:54:51.997890] [dll] add_backend: adding backend `canon630u'
[10:54:51.997912] [dll] add_backend: adding backend `canon_dr'
...
[10:54:51.999402] [dll] sane_get_devices
...
[10:54:52.007640] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:52.007653] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[10:54:52.007668] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[10:54:52.007682] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[10:54:52.007695] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[10:54:52.007706] [dll] load: couldn't find backend `v4l' (No such file or directory)
...
[10:54:52.060929] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:52.060937] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[10:54:52.060948] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[10:54:52.061135] [dll] init: initializing backend `pixma'
[10:54:52.065682] [dll] init: backend `pixma' is version 1.0.27
...
[10:54:59.496460] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:59.496471] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[10:54:59.496500] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[10:54:59.496644] [dll] init: initializing backend `canon_dr'
[10:54:59.496664] [dll] init: backend `canon_dr' is version 1.0.58
[10:54:59.501410] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:59.501423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[10:54:59.501434] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[10:54:59.501575] [dll] init: initializing backend `canon630u'
[10:54:59.506185] [dll] init: backend `canon630u' is version 1.0.1
[10:54:59.506199] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:59.506207] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[10:54:59.506218] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[10:54:59.506310] [dll] init: initializing backend `canon'
[10:54:59.506429] [dll] init: backend `canon' is version 1.0.0
...
[10:54:59.528373] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[10:54:59.528383] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[10:54:59.528398] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[10:54:59.528543] [dll] init: initializing backend `net'
[10:54:59.530612] [dll] init: backend `net' is version 1.0.29
[10:55:00.933650] [dll] sane_get_devices: found 1 devices
device `pixma:04A91822' is a CANON Canon PIXMA TS6100 Series multi-function peripheral
[10:55:00.933721] [dll] sane_exit: exiting
...
[10:55:00.935994] [dll] sane_exit: calling backend `plustek's exit function
[10:55:00.936106] [dll] sane_exit: calling backend `pixma's exit function
[10:55:00.936224] [dll] sane_exit: calling backend `pieusb's exit function
...
[10:55:00.939487] [dll] sane_exit: calling backend `genesys's exit function
...
[10:55:00.941698] [dll] sane_exit: calling backend `canon_dr's exit function
[10:55:00.941787] [dll] sane_exit: calling backend `canon630u's exit function
[10:55:00.941870] [dll] sane_exit: calling backend `canon's exit function
[10:55:00.941948] [dll] sane_exit: calling backend `bh's exit function
...
[10:55:00.943612] [dll] sane_exit: finished




scanimage -T


Output format is not set, using pnm as a default.

scanimage: open of device pixma:04A91822 failed: Device busy


scanimage -V


scanimage (sane-backends) 1.0.29; backend version 1.0.29


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20200503/3bc4c2d8/attachment-0001.html>


More information about the sane-devel mailing list