[sane-devel] Canon Pixma TS6150 not working - device is busy

Sun May 3 14:10:02 BST 2020

Le dimanche 3 mai 2020, 11:27:50 CEST Mike X a écrit :
> Hello together,
> 
> 
> I subscribed because I have an issue with my Canon Pixma TS6150 on USB after
> upgrading to Ubuntu 20.04 LTS from Ubuntu 16.04 LTS.
> 
> 
> As XSane and Simple Scan under Ubuntu 16.04 LTS did not work out, I loaded
> the driver from the Canon side. This latter worked out.
> 
> 
> Now under Ubuntu 20.04 LTS it does not work out any longer. Thus, I tried
> with installing Sane and XSane. I installed all the drivers several times
> with a fresly installed Ubuntu (took some time :-)): At first the Canon
> driver without Sane/Xsane, then at first Sane/Xsane and then the Canon
> driver, however the error messages are nearly the same. I also changed the
> USB-ports.
> 
> 
> The original Canon driver scangearmp2 delivers the error that a connection
> can‘t be established (translation from German language). When I installed
> it, it gave the error message that canberra-gtk-module was missing,
> however, the installation of this did not work out either.
> 
> 
> The scanner is not explicitly mentioned in the list of supported deveices.
> However, the series 6100 is mentioned, thus, my guess was, that it is
> supported. The error message received from sane is: Device is busy
> 
> 
> Any idea is appreciated. Thank you in advance.
> 
> 
> Some more info:
> 
> 
> Lsusb
> 
> 
> recognizes the scanner: Bus 002 Device 003: ID 04a9:1822 Canon, Inc. TS6100
> series
> 
> 
>         sane-find-scanner
> 
> found USB scanner (vendor=0x04a9 [Canon], product=0x1822 [TS6100 series])   
>    at libusb:002:003
> 
>         scanimage -L
> 
> device `pixma:04A91822' is a CANON Canon PIXMA TS6100 Series multi-function
> peripheral
> 
> 
>         SANE_DEBUG_DLL=5 scanimage -L
> 
> [10:54:51.997138] [sanei_debug] Setting debug level of dll to 5.
> [10:54:51.997300] [dll] sane_init: SANE dll backend version 1.0.13 from
> sane-backends 1.0.29 [10:54:51.997322] [dll] sane_init/read_dlld:
> attempting to open directory `./dll.d' [10:54:51.997367] [dll]
> sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
> [10:54:51.997402] [dll] sane_init/read_dlld: using config directory
> `/etc/sane.d/dll.d' [10:54:51.997443] [dll] sane_init/read_dlld:
> considering /etc/sane.d/dll.d/hplip [10:54:51.997491] [dll]
> sane_init/read_config: reading dll.d/hplip [10:54:51.997531] [dll]
> add_backend: adding backend `hpaio'
> [10:54:51.997566] [dll] sane_init/read_dlld: done.
> [10:54:51.997601] [dll] sane_init/read_config: reading dll.conf
> [10:54:51.997636] [dll] add_backend: adding backend `net'
> [10:54:51.997659] [dll] add_backend: adding backend `abaton'
> [10:54:51.997839] [dll] add_backend: adding backend `bh'
> [10:54:51.997860] [dll] add_backend: adding backend `canon'
> [10:54:51.997890] [dll] add_backend: adding backend `canon630u'
> [10:54:51.997912] [dll] add_backend: adding backend `canon_dr'
> ...
> [10:54:51.999402] [dll] sane_get_devices
> ...
> [10:54:52.007640] [dll] load: searching backend `v4l' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:52.007653] [dll]
> load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
> [10:54:52.007668] [dll] load: couldn't open
> `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or
> directory) [10:54:52.007682] [dll] load: trying to load
> `/usr/lib/sane/libsane-v4l.so.1' [10:54:52.007695] [dll] load: couldn't
> open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
> [10:54:52.007706] [dll] load: couldn't find backend `v4l' (No such file or
> directory) ...
> [10:54:52.060929] [dll] load: searching backend `pixma' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:52.060937] [dll]
> load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
> [10:54:52.060948] [dll] load: dlopen()ing
> `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [10:54:52.061135] [dll]
> init: initializing backend `pixma'
> [10:54:52.065682] [dll] init: backend `pixma' is version 1.0.27
> ...
> [10:54:59.496460] [dll] load: searching backend `canon_dr' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:59.496471] [dll]
> load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
> [10:54:59.496500] [dll] load: dlopen()ing
> `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [10:54:59.496644]
> [dll] init: initializing backend `canon_dr'
> [10:54:59.496664] [dll] init: backend `canon_dr' is version 1.0.58
> [10:54:59.501410] [dll] load: searching backend `canon630u' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:59.501423] [dll]
> load: trying to load
> `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [10:54:59.501434]
> [dll] load: dlopen()ing
> `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [10:54:59.501575]
> [dll] init: initializing backend `canon630u'
> [10:54:59.506185] [dll] init: backend `canon630u' is version 1.0.1
> [10:54:59.506199] [dll] load: searching backend `canon' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:59.506207] [dll]
> load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
> [10:54:59.506218] [dll] load: dlopen()ing
> `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [10:54:59.506310] [dll]
> init: initializing backend `canon'
> [10:54:59.506429] [dll] init: backend `canon' is version 1.0.0
> ...
> [10:54:59.528373] [dll] load: searching backend `net' in
> `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [10:54:59.528383] [dll]
> load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
> [10:54:59.528398] [dll] load: dlopen()ing
> `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [10:54:59.528543] [dll]
> init: initializing backend `net'
> [10:54:59.530612] [dll] init: backend `net' is version 1.0.29
> [10:55:00.933650] [dll] sane_get_devices: found 1 devices
> device `pixma:04A91822' is a CANON Canon PIXMA TS6100 Series multi-function
> peripheral [10:55:00.933721] [dll] sane_exit: exiting
> ...
> [10:55:00.935994] [dll] sane_exit: calling backend `plustek's exit function
> [10:55:00.936106] [dll] sane_exit: calling backend `pixma's exit function
> [10:55:00.936224] [dll] sane_exit: calling backend `pieusb's exit function
> ...
> [10:55:00.939487] [dll] sane_exit: calling backend `genesys's exit function
> ...
> [10:55:00.941698] [dll] sane_exit: calling backend `canon_dr's exit function
> [10:55:00.941787] [dll] sane_exit: calling backend `canon630u's exit
> function [10:55:00.941870] [dll] sane_exit: calling backend `canon's exit
> function [10:55:00.941948] [dll] sane_exit: calling backend `bh's exit
> function ...
> [10:55:00.943612] [dll] sane_exit: finished
> 
> 
> 
> 
> scanimage -T
> 
> 
> Output format is not set, using pnm as a default.
> 
> scanimage: open of device pixma:04A91822 failed: Device busy
> 
> 
> scanimage -V
> 
> 
> scanimage (sane-backends) 1.0.29; backend version 1.0.29
I experience the same problem with CANON PIXMA TS5350 with kubuntu 20.04. 
Problems also with printing. I tried also with the live CD it is the same.
Daniel