[sane-devel] Canon MF110/910 Series is not supported

Thierry HUCHARD thierry at ordissimo.com
Tue Sep 15 15:42:34 BST 2020

Le 2020-09-15 15:29, Павел Данилов via sane-devel a écrit :
> Hello, I'd like to share my experience with using sane-backend. My
> printer/scanner model is Canon I-SENSYS MF113w. So, I've downloaded
> the sources of the latest version (1.0.31) and compiled the pixma
> backend, because it's compatible with my printer. After the
> installation process, I've run the scanimage routine. The following is
> the output:
> pavel at Inspiron:~$ sudo scanimage -L
> [sudo] пароль для pavel:
> [20:03:03.665848] [bjnp] add_scanner: Scanner Canon MF110/910 Series
> is not supported, model is unknown! Please report upstream
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> This let me to conclude, that the SANE backend successfully recognized
> my scanner via Wi-Fi, but was unsuccessful at establishing
> communication with it.
> So, as the final conclusion, that scanner model (Canon I-SENSYS MF113w
> of Scanner Canon MF110/910 Series) isn't working, so I'm reporting
> that fact.
Hi Pavel

update libsane, libsane-common and sane-utils to version 1.0.31.
disable the pixma driver in /etc/sane.d/dll.conf
Your device is supported in wifi or ethernet via AirScan


More information about the sane-devel mailing list