[sane-devel] Canon XK90 and TS8030 works with sane

[WATANABE Kazuhiro]

Hi,

On Tue, 07 Dec 2021 17:44:46 +0900,
Thierry Huchard wrote:
> Le 2021-12-06 10:37, WATANABE Kazuhiro a écrit :
> > Hi, all.
> > 
> > I have tested my Canon XK90 with the following environment.
> > 
> >  sane-backends-1.0.32_7
> >  sane-airscan-0.99.26
> >  xsane-0.999_6
> >  FreeBSD 12.2-RELEASE
> > 
> > | $ scanimage -V
> > | scanimage (sane-backends) 1.0.32; backend version 1.0.32
> > | $ scanimage -L
> > | device `pixma:04A918B6_103859' is a CANON Canon PIXUS XK90 Series
> > multi-function peripheral
> > | device `escl:https://192.168.0.108:443' is a Canon XK90 series
> > platen scanner
> > | device `airscan:e0:Canon XK90 series' is a eSCL Canon XK90 series
> > ip=192.168.0.108
> > | $
> > 
> > Scanning all supported resolutions (up to 1200dpi) is good with both
> > sane-pixma and sane-airscan.  Monochrome scan is also fine.
> > 
> > By the way, sane-escl doesn't work at all.
> > 
> > | $ scanimage -d 'escl:https://192.168.0.108:443' -o test.pnm
> > | scanimage: open of device escl:https://192.168.0.108:443 failed:
> > Invalid argument
> > | $
> Can you provide me with the log file?
> SANE_DEBUG_ESCL=255 scanimage -d 'escl:https://192.168.0.108:443' -o
> test.pnm 2> escl-xk90.log
> 
> Thierry

OK.  The log is:

*****
[21:12:28.116002] [sanei_debug] Setting debug level of escl to 255.
[21:12:28.116178] [escl] escl sane_init
[21:12:28.118200] [escl] escl sane_open
[21:12:28.118222] [escl] escl_parse_name
[21:12:28.135446] [escl] escl_curl_url: URL: https://192.168.0.108:443/eSCL/ScannerCapabilities
[21:12:28.135919] [escl] Before use hack
[21:12:28.135933] [escl] After use hack
[21:12:28.135942] [escl] Ignoring safety certificates, use https
[21:12:28.180634] [escl] The scanner didn't respond: SSL connect error
scanimage: open of device escl:https://192.168.0.108:443 failed: Invalid argument
[21:12:28.180750] [escl] escl sane_exit
*****

-- 
WATANABE Kazuhiro (CQG00620 at nifty.ne.jp)