[sane-devel] Canon XK90 and TS8030 works with sane

[Thierry Huchard]

Le 2021-12-07 13:44, WATANABE Kazuhiro a écrit :
> Hi,
> 
> On Tue, 07 Dec 2021 17:44:46 +0900,
> Thierry Huchard wrote:
>> Le 2021-12-06 10:37, WATANABE Kazuhiro a écrit :
>> > Hi, all.
>> >
>> > I have tested my Canon XK90 with the following environment.
>> >
>> >  sane-backends-1.0.32_7
>> >  sane-airscan-0.99.26
>> >  xsane-0.999_6
>> >  FreeBSD 12.2-RELEASE
>> >
>> > | $ scanimage -V
>> > | scanimage (sane-backends) 1.0.32; backend version 1.0.32
>> > | $ scanimage -L
>> > | device `pixma:04A918B6_103859' is a CANON Canon PIXUS XK90 Series
>> > multi-function peripheral
>> > | device `escl:https://192.168.0.108:443' is a Canon XK90 series
>> > platen scanner
>> > | device `airscan:e0:Canon XK90 series' is a eSCL Canon XK90 series
>> > ip=192.168.0.108
>> > | $
>> >
>> > Scanning all supported resolutions (up to 1200dpi) is good with both
>> > sane-pixma and sane-airscan.  Monochrome scan is also fine.
>> >
>> > By the way, sane-escl doesn't work at all.
>> >
>> > | $ scanimage -d 'escl:https://192.168.0.108:443' -o test.pnm
>> > | scanimage: open of device escl:https://192.168.0.108:443 failed:
>> > Invalid argument
>> > | $
>> Can you provide me with the log file?
>> SANE_DEBUG_ESCL=255 scanimage -d 'escl:https://192.168.0.108:443' -o
>> test.pnm 2> escl-xk90.log
>> 
>> Thierry
> 
> OK.  The log is:
> 
> *****
> [21:12:28.116002] [sanei_debug] Setting debug level of escl to 255.
> [21:12:28.116178] [escl] escl sane_init
> [21:12:28.118200] [escl] escl sane_open
> [21:12:28.118222] [escl] escl_parse_name
> [21:12:28.135446] [escl] escl_curl_url: URL:
> https://192.168.0.108:443/eSCL/ScannerCapabilities
> [21:12:28.135919] [escl] Before use hack
> [21:12:28.135933] [escl] After use hack
> [21:12:28.135942] [escl] Ignoring safety certificates, use https
> [21:12:28.180634] [escl] The scanner didn't respond: SSL connect error
> scanimage: open of device escl:https://192.168.0.108:443 failed:
> Invalid argument
> [21:12:28.180750] [escl] escl sane_exit
> *****

Thanks for your log feedback!
Can you test this?

Can you provide me with the log file?
SANE_DEBUG_ESCL=255 scanimage -d 'escl:http://192.168.0.108:80' -o 
test.pnm 2> escl-xk90-2.log

Thierry