[sane-devel] bbb

[Brian Potkin]

Machine A has a USB-connected Epson Stylus Photo RX420 shared on the
network (192.168.7.0/24) in saned.conf. Machine B has an UMAX Astra
2400S using a SCSI connection and is also shared. Bothe scanners
work well from their respective machines.

On machine C net.conf contains the IP addresses of A and B. Running
'SANE_DEBUG_NET=128 scanimage -L' give the Epson as didcovered but
not the UMAX. Puzzling. Any suggestions?

[17:12:59.501052] [sanei_debug] Setting debug level of net to 128.
[17:12:59.501610] [net] sane_init: authorize != null, version_code != null
[17:12:59.501703] [net] sane_init: SANE net backend version 1.0.14 (AF-indep+IPv6) from sane-backends 1.0.31-debian
[17:12:59.501779] [net] sane_init: Client has little endian byte order
[17:12:59.501851] [net] sane_init: searching for config file
[17:12:59.502118] [net] sane_init: connect timeout set to 60 seconds
[17:12:59.502205] [net] sane_init: trying to add 192.168.7.20
[17:12:59.502370] [net] add_device: adding backend 192.168.7.20
[17:12:59.508038] [net] add_device: backend 192.168.7.20 added
[17:12:59.508173] [net] sane_init: trying to add 192.168.7.40
[17:12:59.508251] [net] add_device: adding backend 192.168.7.40
[17:12:59.511861] [net] add_device: backend 192.168.7.40 added
[17:12:59.512017] [net] sane_init: done reading config
[17:12:59.512118] [net] sane_init: evaluating environment variable SANE_NET_HOSTS
[17:12:59.512217] [net] sane_init: evaluating environment variable SANE_NET_TIMEOUT
[17:12:59.525890] [net] sane_init: done
[17:12:59.526126] [net] sane_get_devices: local_only = 0
[17:12:59.526275] [net] connect_dev: trying to connect to 192.168.7.40
[17:12:59.527935] [net] connect_dev: [0] connection succeeded (IPv4)
[17:12:59.528161] [net] connect_dev: sanei_w_init
[17:12:59.528960] [net] connect_dev: net_init (user=brian, local version=1.0.3)
[17:12:59.536461] [net] net_avahi_browse_callback: CACHE_EXHAUSTED
[17:13:00.537897] [net] net_avahi_browse_callback: ALL_FOR_NOW
[17:13:09.723768] [net] connect_dev: freeing init reply (status=Success, remote version=1.0.3)
[17:13:09.724077] [net] connect_dev: done
[17:13:10.060260] [net] sane_get_devices: got 192.168.7.40:epson2:libusb:005:003
[17:13:10.060563] [net] connect_dev: trying to connect to 192.168.7.20
[17:13:10.062680] [net] connect_dev: [0] connection succeeded (IPv4)
[17:13:10.062908] [net] connect_dev: sanei_w_init
[17:13:10.063357] [net] connect_dev: net_init (user=brian, local version=1.0.3)
[17:13:10.098176] [net] connect_dev: freeing init reply (status=Success, remote version=1.0.3)
[17:13:10.098412] [net] connect_dev: done
[17:13:10.141432] [net] sane_get_devices: finished (1 devices)
[17:13:11.279651] [net] sane_exit: exiting
[17:13:11.279903] [net] net_avahi_cleanup: stopping thread
[17:13:11.286575] [net] net_avahi_cleanup: done
[17:13:11.286823] [net] sane_exit: closing dev 0x20d6890, ctl=6
[17:13:11.287337] [net] sane_exit: closing dev 0x20d4430, ctl=7
[17:13:11.288089] [net] sane_exit: finished.