[sane-devel] Sharing a network scanner thru saned
Thierry Huchard
thierry at ordissimo.com
Thu Jan 21 18:37:55 GMT 2021
Le 2021-01-21 18:05, Thiago Milczarek Sayão a écrit :
> I work at a company that has 530+ stores, each one with a Ricoh SP
> 3710 device that works thru network.
> There are more than 3000 machines total.
>
> After installing the Ricoh Sane drivers, I can list the scanners:
>
> device `sp_330_3710_series:SP_3710SF-IP-172.18.15.249' is a RICOH SP
> 3710SF ADF Scanner
> device `escl:https://172.18.15.249:443' is a ESCL RICOH SP 3710SF
> (31317e) SSL flatbed scanner
> device `escl:http://172.18.15.249:631' is a ESCL RICOH SP 3710SF
> (31317e) flatbed scanner
> device `net:localhost:sp_330_3710_series:SP_3710SF-IP-172.18.15.249'
> is a RICOH SP 3710SF ADF Scanner
>
> Note: The device does not work using escl.
Can you give me the logs of the commands below?
# scanimage --version
# SANE_ESCL_DEBUG=255 scanimage > test.pnm 2>log.txt
Thank's
>
> Since we have 530 stores, I would like to configure only 530 machines
> (instead of 3000). So the idea is to install the Ricoh package on this
> "central" machine and share with the others.
>
> The scanner is available thru the network (not usb). I want to
> configure saned to serve network scanners. Is it possible?
>
> I have tried it and successfully installed saned, but it won't list
> network scanners to the remote machine.
>
> Thanks.
More information about the sane-devel
mailing list