No subject

     [sanei_debug] Setting debug level of sanei_usb to 255.
     [sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
     [sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
     usb_set_debug: Setting debugging level to 255 (on)
     usb_os_find_busses: Found /dev/usb0
     usb_os_find_busses: Found /dev/usb1
     usb_os_find_devices: Found /dev/ugen0 on /dev/usb1
     usb_control_msg: 128 6 512 0 0xbfbff640 8 1000
     usb_control_msg: 128 6 512 0 0x8058100 32 1000
     [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0  at libusb:/dev/usb1:/dev/ugen0
     [sanei_usb] sanei_usb_init: found 1 devices
     usb_control_msg: 128 6 769 0 0x8060000 100 1000
     USB error: error sending control message: Input/output error
     usb_control_msg: 128 6 770 0 0x8060080 100 1000
     USB error: error sending control message: Input/output error

       # No SCSI scanners found. If you expected something different, make sure that
       # you have loaded a SCSI driver for your SCSI adapter.

     found USB scanner (vendor=0x04b8, product=0x011b) at libusb:/dev/usb1:/dev/ugen0
       # Your USB scanner was (probably) detected. It may or may not be supported by
       # SANE. Try scanimage -L and read the backend's manpage.

       # Not checking for parallel port scanners.

       # Most Scanners connected to the parallel port or other proprietary ports
       # can't be detected by this program.