No subject
Sat Dec 3 12:15:27 GMT 2022
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_devices: Found /dev/ugen0 on /dev/usb1
usb_control_msg: 128 6 512 0 0xbfbfece0 8 1000
usb_control_msg: 128 6 512 0 0x80521a0 32 1000
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0030
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0130
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0230
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2004
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a20
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a26
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2022
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a2a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2040
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2060
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x207e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20be
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20c0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20b0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20de
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fc
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fe
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2061
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2093
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2091
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2095
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2097
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208d
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20ff
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208f
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20fd
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0114
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011f
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_devices: Found /dev/ugen0 on /dev/usb1
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160
[sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0006
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0008
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0873
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0010
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1005
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1105
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0201
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0601
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8, product=0x4002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021e
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0218
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0219
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021a
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021d
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021c
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0210
[sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x002d
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0400
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0402
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0403
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0413
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0422
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2011
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201b
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2017
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201a
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201f
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2014
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0444
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_debug] Setting debug level of epson to 255.
[epson] sane_init: sane-backends 1.0.14
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner0: Device not configured
[sanei_usb] sanei_usb_init: couldn't open /dev/uscanner1: Device not configured
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x011b) interface 0 at libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_init: found 1 devices
[epson] sane_init, ># epson.conf<
[epson] sane_init, >#<
[epson] sane_init, ># here are some examples for how to configure the EPSON backend<
[epson] sane_init, >#<
[epson] sane_init, ># SCSI scanner:<
[epson] sane_init, >scsi EPSON<
[epson] sane_init, >#<
[epson] sane_init, ># Parallel port scanner:<
[epson] sane_init, >#pio 0x278<
[epson] sane_init, >#pio 0x378<
[epson] sane_init, >#pio 0x3BC<
[epson] sane_init, >#<
[epson] sane_init, ># USB scanner:<
[epson] sane_init, ># There are two different methods of configuring a USB scanner: libusb and the kernel module<
[epson] sane_init, ># For any system with libusb support (which is pretty much any recent Linux distribution) the<
[epson] sane_init, ># following line is sufficient. This however assumes that the connected scanner (or to be more<
[epson] sane_init, ># accurate, it's device ID) is known to the backend.<
[epson] sane_init, >usb<
[epson] attach_one_usb()
[epson] SANE Epson Backend v0.2.41 - 2004-02-01
[epson] attach(, 3)
[epson] attach: opening
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0103
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0104
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0106
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0109
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0107
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0110
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0112
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0116
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011b
[epson] attach_one_usb(libusb:/dev/usb1:/dev/ugen0)
[epson] SANE Epson Backend v0.2.41 - 2004-02-01
[epson] attach(libusb:/dev/usb1:/dev/ugen0, 3)
[epson] attach: opening libusb:/dev/usb1:/dev/ugen0
[sanei_usb] sanei_usb_open: trying to open device `libusb:/dev/usb1:/dev/ugen0'
[sanei_usb] sanei_usb_open: found bulk-in endpoint (address 1)
[sanei_usb] sanei_usb_open: found bulk-out endpoint (address 2)
[sanei_usb] sanei_usb_open: opened usb device `libusb:/dev/usb1:/dev/ugen0' (*dn=0)
[sanei_usb] sanei_usb_get_vendor_product: device 0: vendorID: 0x04b8, productID: 0x011b
[epson] Found valid EPSON scanner: 0x4b8/0x11b (vendorID/productID)
[epson] reset()
[epson] send buf, size = 2
[epson] buf[0] 1b .
[epson] buf[1] 40 @
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 0000: 1B 40 . at ..............
[sanei_usb] sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes
[sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
USB error: error reading from bulk endpoint /dev/ugen0.01: Connection timed out
[sanei_usb] sanei_usb_read_bulk: read failed: Connection timed out
USB error: usb_clear_halt called, unimplemented on BSD
[epson] receive buf, expected = 1, got = 0
[epson] get_identity_information()
[epson] send buf, size = 2
[epson] buf[0] 1b .
[epson] buf[1] 49 I
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 0000: 1B 49 .I..............
At this point scanimage just hangs forever.
Cheers,
Brook
More information about the sane-devel
mailing list