[sane-devel] scanbd with Fujitsu fi-7260 Scanner: need help

[Dirk Meier]

Am Samstag, 7. Juni 2025, 02:06:27 CEST schrieb m. allan noah:
> Please note that I have never used scanbd, but I am the author of the
> fujitsu sane backend. I just took a quick look at your logs to see if I
> could help.
> 
> Your scanbd config seems really odd, with lots of default stuff you don't
> need enabled. The fujitsu.conf file already has support for reading the
> function setting and placing the value in an environment variable. The base
> scanbd.conf already has support for reading a scan button and calling
> 'test.script'. Seems like all you need to do is replace test.script with
> something useful.
> 
> Also, it is expected that pressing the scan button on the scanner, and then
> running scanimage -A will not show that the button was pressed. Scanimage
> is not a daemon, so is not running when the button press happens.
> 
> allan
> 
> On Fri, Jun 6, 2025 at 3:45 PM Dirk Meier via sane-devel <
> 
> sane-devel at alioth-lists.debian.net> wrote:
> > Am Freitag, 6. Juni 2025, 01:27:10 CEST schrieb Tricia:
> > > Hi, Dirk.
> > > 
> > > On Thu, Jun 05, 2025 at 01:25:42PM -0700, Dirk Meier via sane-devel
> > 
> > wrote:
> > > > I have tried the following filters: “2”, “.*2.*”, “^2.*”, “.*2$” none
> > 
> > of
> > 
> > > > them worked. Only when I use “.*” as a filter is the assigned script
> > > > executed. But continuously.
> > > 
> > > I think your filter should be something like "^function$", and then
> > > you'd use a `numerical-trigger` block to specify which transitions you
> > > want to trigger on.
> > > 
> > > `filter` controls, in effect, the name of the variable; not what values
> > > to trigger on.
> > > 
> > > If this doesn't get you anywhere, perhaps you can include both the full
> > > output of `scanimage -A` and the full output of scanbd logs, making sure
> > > you adjust the switch while it's running?
> > > 
> > > - Tricia
> > 
> > Hello Tricia,
> > attached are two files output of scanimage -A with function wheel set to
> > #2 and
> > output of scanbd -f -d7 with wheel set to #2 and pressed scan-button.
> > Scanner has wheel for function number 0-9 which ist shown in scanimage -A
> > and
> > has separate pushbutton "scan". But scanimage -A shows only "no" for scan
> > button even if it is pressed before scanimage -A.
> > I am confused how to filter.
> > 
> > --
> > Dirk

Hello,
in scanbd.conf filter "^scan$" works and calls the attached scan-function-
handler.script.
In scan-function-handler.script case 0) works fine. But case 1) shows: "scanbd: 
sig_term/int_handler called with signal 2" and nothing happens.
Commands of "case 1)" in an shell-script works fine but not as "case 1)" in 
scan-function-handler.script. Case 2) and case 3) same as Case 1).
Any hint?

-- 
Dirk
-------------- next part --------------
scanbd: reading config file /etc/scanbd/scanbd.conf
scanbd: debug on: level: 7
scanbd: dropping privs to uid saned
scanbd: dropping privs to gid lp
scanbd: drop privileges to gid: 487
scanbd: Running as effective gid 487
scanbd: drop privileges to uid: 100
scanbd: Running as effective uid 100
scanbd: dbus_init
scanbd: dbus match type='signal',interface='org.freedesktop.Hal.Manager'
scanbd: SANE_CONFIG_DIR not set
scanbd: sane version 1.0
scanbd: Scanning for local-only devices
scanbd: found device: fujitsu:fi-7280:1201263 FUJITSU fi-7280 scanner
scanbd: start_sane_threads
scanbd: Starting poll thread for fujitsu:fi-7280:1201263
scanbd: Thread started for device fujitsu:fi-7280:1201263
scanbd: start dbus thread
scanbd: sane_poll
scanbd: Not Primary Owner (-1)
scanbd: Name Error (Connection ":1.1701" is not allowed to own the service "de.kmux.scanbd.server" due to security policies in the configuration file)
scanbd: udev init
scanbd: get udev monitor
scanbd: udev fd is non-blocking, now setting to blocking mode
scanbd: start udev thread
scanbd: udev thread started
scanbd: found 100 options for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_options
scanbd: found 1 actions in section (null)
scanbd: checking action scan with filter: ^scan$
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action scan (0) for fujitsu:fi-7280:1201263, option[91]: scan as: scan-function-handler.script
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option scan is 0
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 2 functions in section (null)
scanbd: checking function function_knob with filter: ^message.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking function function_mode with filter: ^mode.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: installing function function_mode for fujitsu:fi-7280:1201263, option[3]: mode as env: SCANBD_FUNCTION_MODE
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: found 7 local device sections
scanbd: checking device section avision with filter: ^avision.*
scanbd: checking device section fujitsu with filter: ^fujitsu.*
scanbd: found 4 local action for device fujitsu:fi-7280:1201263 [fujitsu]
scanbd: sane_find_matching_options
scanbd: found 4 actions in section fujitsu
scanbd: checking action paperload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperload (1) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action paperunload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperunload (2) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: adding additional action paperunload (2) for option[84] with (null)
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action coveropen with filter: ^cover-open.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action coveropen (3) for fujitsu:fi-7280:1201263, option[86]: cover-open as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option cover-open is 0
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action powersave with filter: ^power-save.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action powersave (4) for fujitsu:fi-7280:1201263, option[88]: power-save as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option power-save is 0
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 1 functions in section fujitsu
scanbd: checking function function_knob with filter: ^function.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: installing function function_knob for fujitsu:fi-7280:1201263, option[92]: function as env: SCANBD_FUNCTION
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking device section hp with filter: ^hpaio.*
scanbd: checking device section pixma with filter: ^pixma.*
scanbd: checking device section snapscan with filter: (.*snapscan.*|.*Perfection.*)
scanbd: checking device section canon with filter: ^genesys.*
scanbd: checking device section plustek with filter: plustek
scanbd: timeout: 500 ms
scanbd: Start the polling for device fujitsu:fi-7280:1201263
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 1
scanbd: value trigger: numerical
scanbd: trigger action for scan for device fujitsu:fi-7280:1201263 with script scan-function-handler.script
scanbd: get_sane_option_value
scanbd: Value of mode as string (len 7, hash -621353420): Lineart
scanbd: setting env: SCANBD_FUNCTION_MODE=Lineart
scanbd: get_sane_option_value
scanbd: setting env: SCANBD_FUNCTION=0
scanbd: setting env: PATH=/usr/sbin:/usr/bin:/sbin:/bin
scanbd: No PWD, setting env: PWD=/home/dirk
scanbd: setting env: USER=root
scanbd: setting env: HOME=/root
scanbd: setting env: SCANBD_DEVICE=fujitsu:fi-7280:1201263
scanbd: setting env: SCANBD_ACTION=scan
scanbd: append string fujitsu:fi-7280:1201263 to signal scan_begin
scanbd: now sending signal scan_begin
scanbd: append string SCANBD_FUNCTION_MODE=Lineart to signal trigger
scanbd: append string SCANBD_FUNCTION=0 to signal trigger
scanbd: append string PATH=/usr/sbin:/usr/bin:/sbin:/bin to signal trigger
scanbd: append string PWD=/home/dirk to signal trigger
scanbd: append string USER=root to signal trigger
scanbd: append string HOME=/root to signal trigger
scanbd: append string SCANBD_DEVICE=fujitsu:fi-7280:1201263 to signal trigger
scanbd: append string SCANBD_ACTION=scan to signal trigger
scanbd: now sending signal trigger
scanbd: now flushing the dbus
scanbd: unref the signal
scanbd: using relative script path: scan-function-handler.script, expanded to: /etc/scanbd/scan-function-handler.script
scanbd: waiting for child: /etc/scanbd/scan-function-handler.script
scanbd: child /etc/scanbd/scan-function-handler.script exited with status: 0
scanbd: append string fujitsu:fi-7280:1201263 to signal scan_end
scanbd: now sending signal scan_end
scanbd: reopen device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: sig_term/int_handler called with signal 2
scanbd: stop_sane_threads
scanbd: stopping poll thread for device fujitsu:fi-7280:1201263
scanbd: waiting for poll thread for device fujitsu:fi-7280:1201263
scanbd: sane_thread_cleanup_mutex
scanbd: closing device fujitsu:fi-7280:1201263
scanbd: freeing opt resources for device fujitsu:fi-7280:1201263 thread
scanbd: freeing function resources for device fujitsu:fi-7280:1201263 thread
scanbd: stop dbus thread
scanbd: stop udev thread
scanbd: join udev thread
scanbd: cleanup device handler
scanbd: close udev monitor
scanbd: close udev
scanbd: exiting scanbd
-------------- next part --------------
scanbd: reading config file /etc/scanbd/scanbd.conf
scanbd: debug on: level: 7
scanbd: dropping privs to uid saned
scanbd: dropping privs to gid lp
scanbd: drop privileges to gid: 487
scanbd: Running as effective gid 487
scanbd: drop privileges to uid: 100
scanbd: Running as effective uid 100
scanbd: dbus_init
scanbd: dbus match type='signal',interface='org.freedesktop.Hal.Manager'
scanbd: SANE_CONFIG_DIR not set
scanbd: sane version 1.0
scanbd: Scanning for local-only devices
scanbd: found device: fujitsu:fi-7280:1201263 FUJITSU fi-7280 scanner
scanbd: start_sane_threads
scanbd: Starting poll thread for fujitsu:fi-7280:1201263
scanbd: Thread started for device fujitsu:fi-7280:1201263
scanbd: start dbus thread
scanbd: sane_poll
scanbd: Not Primary Owner (-1)
scanbd: Name Error (Connection ":1.1711" is not allowed to own the service "de.kmux.scanbd.server" due to security policies in the configuration file)
scanbd: udev init
scanbd: get udev monitor
scanbd: udev fd is non-blocking, now setting to blocking mode
scanbd: start udev thread
scanbd: udev thread started
scanbd: found 100 options for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_options
scanbd: found 1 actions in section (null)
scanbd: checking action scan with filter: ^scan$
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action scan (0) for fujitsu:fi-7280:1201263, option[91]: scan as: scan-function-handler.script
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option scan is 0
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 2 functions in section (null)
scanbd: checking function function_knob with filter: ^message.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking function function_mode with filter: ^mode.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: installing function function_mode for fujitsu:fi-7280:1201263, option[3]: mode as env: SCANBD_FUNCTION_MODE
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: found 7 local device sections
scanbd: checking device section avision with filter: ^avision.*
scanbd: checking device section fujitsu with filter: ^fujitsu.*
scanbd: found 4 local action for device fujitsu:fi-7280:1201263 [fujitsu]
scanbd: sane_find_matching_options
scanbd: found 4 actions in section fujitsu
scanbd: checking action paperload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperload (1) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action paperunload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperunload (2) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: adding additional action paperunload (2) for option[84] with (null)
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action coveropen with filter: ^cover-open.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action coveropen (3) for fujitsu:fi-7280:1201263, option[86]: cover-open as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option cover-open is 0
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action powersave with filter: ^power-save.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action powersave (4) for fujitsu:fi-7280:1201263, option[88]: power-save as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option power-save is 0
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 1 functions in section fujitsu
scanbd: checking function function_knob with filter: ^function.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: installing function function_knob for fujitsu:fi-7280:1201263, option[92]: function as env: SCANBD_FUNCTION
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking device section hp with filter: ^hpaio.*
scanbd: checking device section pixma with filter: ^pixma.*
scanbd: checking device section snapscan with filter: (.*snapscan.*|.*Perfection.*)
scanbd: checking device section canon with filter: ^genesys.*
scanbd: checking device section plustek with filter: plustek
scanbd: timeout: 500 ms
scanbd: Start the polling for device fujitsu:fi-7280:1201263
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 1
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: sig_term/int_handler called with signal 2
scanbd: stop_sane_threads
scanbd: stopping poll thread for device fujitsu:fi-7280:1201263
scanbd: waiting for poll thread for device fujitsu:fi-7280:1201263
scanbd: sane_thread_cleanup_mutex
scanbd: closing device fujitsu:fi-7280:1201263
scanbd: freeing opt resources for device fujitsu:fi-7280:1201263 thread
scanbd: freeing function resources for device fujitsu:fi-7280:1201263 thread
scanbd: stop dbus thread
scanbd: stop udev thread
scanbd: join udev thread
scanbd: cleanup device handler
scanbd: close udev monitor
scanbd: close udev
scanbd: exiting scanbd
-------------- next part --------------
A non-text attachment was scrubbed...
Name: scan-function-handler.script
Type: application/x-shellscript
Size: 1113 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20250609/ac7651bb/attachment-0001.bin>