[Babel-users] client to client communication using babel protocol

[sachin madhusudhana]

The clients are not running on babeld...how can i configure the routes?
On Feb 10, 2015 2:14 AM, "Juliusz Chroboczek" <jch at pps.univ-paris-diderot.fr>
wrote:

> > Consider I have three routers R1,R2,R3. Each of them are configured with
> an ad
> > hoc network and an access point respectively. The ssid of the of the ad
> hoc
> > network of all the routers be mesh and that of the access points be
> C0,C1,C2.
> > The router is running on babel protocol on wireless interface. So when a
> > client say laptop connects to the access point C0 and another laptop
> connect
> > to C2 then can C0 and C2 communicate with each other at 2 hops without
> any
> > configuration of babel?
>
> Are the clients running Babel?
>
> If so, then everything should happen automatically.
>
> If not, then the routers will be able to communicate between themselves
> (they're running Babel), but you will need some additional mechanism to
> route packets towards the clients.
>
> Please read "redistribution" in the Babel manual page and in the Babel FAQ.
> Once you have done that, please come back and tell us more about your
> setup.
>
> -- Juliusz
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/babel-users/attachments/20150213/240230f7/attachment.html>